Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300wsm [norma brass cracks]
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="kato59" data-source="post: 708285" data-attributes="member: 21108"><p>He mentioned that the chamber was cut on the SAAMI min. spec. thus the need to FL Size.I also took my sizing die apart and polished the bore out with crocus cloth and scotch brite to try and eliminate the chaffing/wear off the cases.i have been re-loading for at least 20 years and have never seen this kind of wear and neck cracking before.i have a new bag of Rem. 300wsm brass i might try to see if it is the Norma Brass that is the culprit</p></blockquote><p></p>
[QUOTE="kato59, post: 708285, member: 21108"] He mentioned that the chamber was cut on the SAAMI min. spec. thus the need to FL Size.I also took my sizing die apart and polished the bore out with crocus cloth and scotch brite to try and eliminate the chaffing/wear off the cases.i have been re-loading for at least 20 years and have never seen this kind of wear and neck cracking before.i have a new bag of Rem. 300wsm brass i might try to see if it is the Norma Brass that is the culprit [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
300wsm [norma brass cracks]
Top