300WSM and 210g Projectiles

[Painless300]

I am looking for load data for 300WSM throated for the longer 210 - 215 projectiles.
I have not got the barrel yet but should have it by mid January. I've got brass, primers and bullets just trying to find powder. I have V560 and H1000 on hand. Will either of these work ok?
This rifle will be used exclusively for Elk Hunting.
Any suggestions or load data would be appreciated.

 

[nksmfamjp]

I'm running 212gr Hornady ELDX with RE26 and Fed 215 GMM primers at 2.94" oal....the load is shooting lights out. Several faster powder charges under 0.5" for 3 shots....powder charge is in the photos.

 

[Painless300]

What speeds are you getting?

Looks like from the burn rate chart RE 26 is just under H1000 being a little faster powder. The V560 is a little faster than the RE26.
I guess my question is if the V560 a suitable powder for the 300WSM? RE 26 along with the other popular powders are almost impossible to find.

 

[nksmfamjp]

At 68.8gr, I was getting 2812fps....sd was 4.2, but only 3 shots

 

[Rifleman97]

Looks like 560 should work pretty well for the 210 grain bullets

 

[Painless300]

Thanks for the load data. I'll give it a try, hopefully it will give some decent accuracy.