300WM-180grn. Accubond and H4831

[Jumpalot]

Getting ready to help a buddy load some rounds up. I use RL22 but he has H4831. What's working for you.
Thanks

 

[ICANHITHIMMAN]

H1000 is working for me I have not tried either of the other powders you have.

 

[sewwhat89]

74-75gr H4831sc 180gr NAB/NBTs under 1/2 MOA out to 700 yards tested 0.050" off lands

 

[Moman]

H4831 with the 180 AB's in 300 WM is a very good combination. I've used it a lot. I don't think Nosler lists this powder in their manual but Hodgdon lists it as a max load of 73.0 grains. Fed 215 primers, Norma brass. Bullets did well seated .020 off. This was a consistent 1/2 MOA load. Just work up your load and see what works best. Good luck.

 

[johnnyk]

I'm shooting the 180gn Ballistic Tip ahead of 75.5gn of RL22 and BR2's. Accuracy is running in the .3's and velocity is averaging just over 3100fps in my Savage. I also used the 180gn SMK with the same powder & charge but with 9.5M primers. Again, accuracy ran in the .3's and velocity was just over 3100 (3133fps). These are max loads according to Nosler, so reduce work up. JohnnyK.

 

[ackleyfan]

180 Accubonds,win cases,Fed 215M and IMR4831 works great,as does RL22 and H1000!

 

[AtownBcat]

I have good luck with this combo also. 180 gr accubond, 73.5 (half grain over max load...don't be a ******* ) Br2 primers RWS brass. seated .20 off lands.