If anyone has any load data for the 300WM with the 210 Berger they could share I would appreciate it. I've got a few more of the 210's than the 215's and want to see what size groups I can achieve with the 210. I'm using ADG brass and Federal 215M primers. Have a few pounds of H1000 and a few pounds of Retumbo to try. My gun shoots the 215's very well with 74 grains of H1000. Hopefully, it will shoot the 210's as well or close to as well.
300 WM Load Data With Berger 210VLD
- Thread starter rangerman
- Start date
Help Support Long Range Hunting Forum
jonboatjockey
Well-Known Member
H1000 is what you want, tough to get enough Retumbo in a win mag case with those two bullet choices. I run 76g of H1000 with both the 210 and 215 in ADG. might have to play with seating depth with the 210s depending on what you have for mag length.
str8meat
Well-Known Member
75.5 of h1000 in my a bolts 2825 fps one stainless stalker other medallion. They shoot really good in both.
Wolf76
Well-Known Member
They pretty much shoot the same load. You're on the low node side IMO. I shoot 4+ grains higher than you, but also load a bit longer coal.
I have run the 210's and 215's with both Retumbo and H1000 using Nosler Brass and Federal 215M primers. I get .25-.5MOA groups both powders/bullets. My loads out of my Remington Milspec 700, 1:10tw , 24" barrel are 75.5gr H1000 at 2810FPS and 79gr Retumbo at 2900FPS. Both have ES <20FPS. Seated off lands: .020"(210's), .045"(215's).
**Work up both loads 2 grains lower then shown with both powders.
**Work up both loads 2 grains lower then shown with both powders.
I have a buddy using MagPro with the 205s around 74gr-75gr, if you want to try a different powder. The only reason he's using that is because I had it on my shelf with not much use for it. It seems to be one of the powders that's actually available, so it's worked out well. Seems to be working out well for him.
adk hunter
Well-Known Member
Tagging in to learn...
Tag, me too@
Rick Richard
Well-Known Member
Me too.
