300 win reloader 26

I was shooting the 200AB until I ran low and tried the 196 Hammer Hunter with RL26. No trouble hitting 3150 and easy 0.5 MOA with a 20 year old 300WM Sendero with 1400+ rounds down it. Looking forward to next year to test it out since I never got a "shooter" buck in front of me on our Indiana lease. Guess I am in pay back for 2019 of 3 really nice bucks, 2 - MI and 1 - IN that totaled over 400 inches. I would recommend the 196 highly since it really doesn't care about jump and I just set it at a max magazine COAL of 3.62 which was about 0.095 jump. RL26 is crazy fast with 180-190 grain bullets as well. The 181 Hammer Hunter was over 3300 and I settled in at 3240 for again MOA of 0.5. RL26 is magic elixir for the 300WM for sure. Just be aware of temps over 80 can be serious pressure bump.
 
Ran a couple more today 75gr is the sweet spot. 2957fps from a 24" very low es/sd and a tight cloverleaf @ 100yds. Ran up to 76 grain but accuarcy fell off. Will load up the remaining pieces of peterson brass with this combo and begin testing farther out weather permitting
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

Top