300 Win 230 Berger Hybrid N568 - Data

martinakl

Well-Known Member
Joined
Nov 27, 2013
Messages
2,477
Location
SW IDAHO, 83713
Background: This is just a data set for anyone interested in N568. There isn't much posted data out there for this newer powder.

I was testing H1000, N568, and Ramsholt LRT at the same time, all @ 100 yards. First time running the 230 OTM's in this rife. Just looking for max pressures for each and seeing if something really stood out. This post isn't about my load development process or long range accuracy. Just sharing some data.



Viht has a posted load for the 225 ELD-M on their app:
24.5" Test Barrel
N568: 74.1-78.7gr
FPS: 2,536-2,694 FPS

My data lines up pretty well with theirs. Notice my recorded velocities at 78.5 & 79.0gr.


Sako S20
24" Barrel
~3.59" COAL
Peterson 300 Win Mag "Long" brass (virgin)
Fed 215M primers
Viht N568 Powder
Distance: 100 yards


I need to test at the higher end and see if I can fit a little more powder in the case.

Velocity isn't super awesome but the group I shot with this powder is pretty encouraging.

1632873894972.png
 
Last edited:
CD05EF00-AEF7-478F-A260-F79688B8D28D.jpeg

3263AD55-093D-4E04-B53F-5685F45620F7.jpeg


Under 1.5 MOA for a 15 shot group, 7 grains of powder charge difference.


I tested H1000, N568, and Ramshot LRT the same day. All had some good nodes but I've never had a max pressure test turn out like the N568 loads. I didn't hit pressure signs. I'm already at compressed loads. I might be able to get another 1/2 grain in there.
302E9C04-15F6-465C-9D90-3180411CFBB6.jpeg

Left to right: H1000, N568, Ramshot LRT
 
Last edited:
View attachment 300622
View attachment 300624

Under 1.5 MOA for a 15 shot group, 7 grains of powder charge difference.


I tested H1000, N568, and Ramshot LRT the same day. All had some good nodes but I've never had a max pressure test turn out like the N568 loads. I didn't hit pressure signs. I'm already at compressed loads. I might be able to get another 1/2 grain in there. View attachment 300623
Left to right: H1000, N568, Ramshot LRT
Have you tried using a long drop tube funnel? I use one with N570 and get quite a bit more in a case with the long drop tube. I'm very fond of N570 which is just a longer kernel than N568. Nice shooting!
 
Have you tried using a long drop tube funnel? I use one with N570 and get quite a bit more in a case with the long drop tube. I'm very fond of N570 which is just a longer kernel than N568. Nice shooting!
I have not. I guess I should look into buying one. I was going to try an electric toothbrush to get it to settle when I load the next batch.

*This is my first venture into super compressed powder loads. Kind of a new to me process.
 
At 100 yards it's really not worth marking shots. If you step out to a minimum of 400 then you will start to see a dispersion of shots.
It's a new powder with very little published data, so I thought I'd just share. More context and background added to first post to try tamper expectations. :)

I fully agree with your assessment on needing to test at longer distances. 100 yard groups don't always hold up when it comes to long range accuracy. I haven't even shot for groups (my target is from a pressure test). Lot's more testing is needed as time permits.

This is pretty much how I've done load development lately, so I won't be posting about "my" process (it's not really mine):


*I do not start with the seating depth test.
 
I ran a test looking for pressure using N568 in my new 300 Win Mag. I was using 212 ELDX as sort of a stand-in for Berger 215s so I don't waste any of my stash. I extrapolated start and max loads from Viht data between the 205 and 220.
Anyway, there was zero pressure signs on primer, brass or in bolt lift. I was using a magnetospeed, virgin Lapua brass, and Fed GM magnum match primers.
These are three shot averages taken at about 40 degrees and sea level.
I don't take them for much as they all had the magnetospeed on, but groups were very consistent at around .75 MOA Regardless of charge weight.
 

Attachments

  • BD212F33-5A2F-4178-B24C-D714A0FFEAF6.jpeg
    BD212F33-5A2F-4178-B24C-D714A0FFEAF6.jpeg
    1.5 MB · Views: 46
I ran a test looking for pressure using N568 in my new 300 Win Mag. I was using 212 ELDX as sort of a stand-in for Berger 215s so I don't waste any of my stash. I extrapolated start and max loads from Viht data between the 205 and 220.
Anyway, there was zero pressure signs on primer, brass or in bolt lift. I was using a magnetospeed, virgin Lapua brass, and Fed GM magnum match primers.
These are three shot averages taken at about 40 degrees and sea level.
I don't take them for much as they all had the magnetospeed on, but groups were very consistent at around .75 MOA Regardless of charge weight.
Should mention- I used the Forster drop tube, I really like it, and my chamber is cut a bit longer than SAAMI so I'm seating pretty long.
 
I have some extra N568 for sale in two unopened 1 kilo jugs, 2.2 lbs each, so total 4.4 lbs. I have about 16 lbs, so just selling a little excess.

Anecdotally it seems to be a pretty accurate powder, closer to N570 than N565 on burn rate, supposed to be temp. insensitive, and I think because of the modifications chemically to make it heat insensitive it has a little less
velocity production than say N570 or N565 per grain.

I do like how it meters. Its a lot like a Retumbo or H1000, or RL-26 in its metering. Not like the fat chunky sticks of N565 or N570.
 
I have some extra N568 for sale in two unopened 1 kilo jugs, 2.2 lbs each, so total 4.4 lbs. I have about 16 lbs, so just selling a little excess.

Anecdotally it seems to be a pretty accurate powder, closer to N570 than N565 on burn rate, supposed to be temp. insensitive, and I think because of the modifications chemically to make it heat insensitive it has a little less
velocity production than say N570 or N565 per grain.

I do like how it meters. It's a lot like a Retumbo or H1000, or RL-26 in its metering. Not like the fat chunky sticks of N565 or N570.
Are you in Alaska by chance?
 
Nope, Michigan

But, I am open to trades and sales in
Illinois, Indiana, Wisconsin,
Missouri, Oklahoma, Arkansas, Texas, Michigan, and possibly parts of Ohio.

Alaska, cant help.
Hi, I'm not a forum member, but stumbled upon this.
I'd love too buy/trade you for your N568 powder. I'm in far northeast Illinois area
 
Top