300 PRC

BlazerBeam

Well-Known Member
Joined
Aug 4, 2018
Messages
244
Location
Montana
Have a custom/semi custom 300 PRC I’ll post and see if anyone is interested.
trued Christensen action. Benchmark CF barrel with 108 rounds of mostly factory 225 eldm’s down it. Bedded in a Mcmillan game hunter edge fill Stock. Trigger tech trigger. Nightforce 20 MOA rail bedded to receiver. Barrel was a prefit from Oregon mountain rifle co and so it has their brake. Fantastic shooter. Handloads are with 220 eldx over reloder 26 going 2980 FPS. I have ADG brass with 25 that are once fired and 25 unfired that I could give up too with the rifle. I also have a lot of hornady brass that has been once fired from factory loads as well as 50 twice fired from another rifle. Brand new condition. $2500628BABD9-323E-4A2C-B1FA-DB55219F9998.jpeg44CCCCD8-2130-4C3E-A0BE-213AFC64600A.jpegCC425FDE-26B6-4B6A-B54C-C5882E5A9CCA.jpegD113FDAD-AB03-41DF-BF26-2D608DC1FB75.jpeg8B8CA492-2FFE-4425-9240-0E39C2EE384E.jpeg0F7773A8-E10E-4550-A1E4-40FBA173C1B4.jpegC7FA0F1E-4B3A-4416-863E-C40E73A60843.jpeg45B6A13C-4B0B-4D77-86D4-5F0B49164C0F.jpeg7D80E223-20AB-4DF4-AA34-A9567E781278.jpeg53FC2D51-D250-43BC-9FDC-1403267EE881.jpeg
 
Last edited:

BlazerBeam

Well-Known Member
Joined
Aug 4, 2018
Messages
244
Location
Montana
Scope not included. Only brass and if someone needed a pound of RL26 and 220 eldx’s I could do that too. Rifle weighs a little under 7 bare and 8.6 scoped like in the picture
 

Primary

LRH Assistant
Here are some related products that LRH members are talking about. Clicking on a product will take you to LRH’s partner, Primary, where you can find links to LRH discussions about these products.

 
 
Top