No that was no misprint! the man's logic
was way off.I read a article on this some
where..i cant remember as i have read so many articles. but anyway the guy didnt have
a chronograph so he just shot it at 300
or 400 yards and it had the say point of
impact as his .220 swift so he concluded
that it was going the same speed also..
how he knew how fast the .220 swift was
going i have no idea.. it have been factory ammo or he was assuming it from printed
loaded data velocities...so you see it was
no misprint that guys way off thinking was
off.. anyway i have seen a .318 gerlach
or something like that.. that got 4200+
with 240 grain or 220 grain bullets..BUT!!
The case is huge looked like to me it was
close to a .50bmg and the barrel was
SMOOTH bore.. accuracy wouldnt be worth a
#&@*! and it took a 48 inch barrel to do it.
it was supposed to penetrate tanks.. I think
that some barrel maker should go into looking for a new steel alloy that will
be alot tougher and stand more heat..
and resist erosion better.. there are plenty of steel super alloys but im not
sure which ones would work for barrel steel
now blackstar is supposed have done that
with their barrels they claim that they will
last 2-3 times longer because their steel
is 700 series stainless.now i have never heard of anyone testing to see if this is true.and also their website has moved or removed the section that stated that it was
in gunsmith tips section. they are back in bussiness now.. it could be B.S. like alot
of things..Now i know that super alloy barrels would higher but image if they could extend the life 5x-10x+ of stainless
steel..i know they would be alot hard to machine but there has got to be ways to do
it. A couple of years back i called mcmillan
guns and asked how rock mcmillans .50/20mm
went. he told he he got 4000+fps out of a
750 grain bullet and might would have got
more if the barrel hadnt burnt out in 10
shots!! sometimes he said it would last
close to 100 shot.. he even tried a stellite
insert and it just started melting the rifling where the 8 inch stellite insert stopped.. So he shelved the idea.. Now
if one had a super alloy here and i mean
to take super alloy to last.. but this thing
would have the flatest traj. and wind bucking ability.. Nothing would come close..
just run some numbers for a 750 grain a-max
or 800 grain barnes at 4000 fps and take a
look for yourself..It would be hellish loud
because of the 600+ grains of powder burn!!
and there will be some people who will say
ill just get a tank or missle or 30 mm or
whatever else.. but thats not too realistic
as it would cost the h@LL of you and also
the special permit required to own such equpment and the lack of good match bullets
for the 25mm,30mm or what ever else would also hold one back..I for a fact that you dont need a special permit for a .50/20mm
at least it wasnt 3 years ago when i checked. and as longs it says .50 and not moved up to 20mm.i checked this out because i seen a 20mm action for sale its was labeled as a .50/20mm action though.. im not sure why.. as for as calibers go there
is no right or wrong calibers in my opinion
as everyone is diffrent.. unless it is undergunned for the game intended.. but thats not for me to decide..as i would hunt
ground squrriels with a .340 weatherby or
.50bmg (if had a .50bmg) if the area permited it..as I DONT NOT COMPRMISE the safety of others with my crazy ideas..
Now im not saying i do this in with regularity but i will if i decide too..
and i also listen to EVERYONES opinion
on equipment,bullets,scopes,guns, experiences.. as this is better than any mag
article to me..no matter if it seems right
or wrong.. reloading is nothing to play
with as you could easily cause serious injury to yourself if not taking the proper
safety precautions and working up loads
safely...by the way im getting a oehler 35p
soon also as i have had it with my cheap chronograph..it just hasnt been reliable in
my experiences with it.. good luck and good
shooting.. and maybe one day some one or
barrel company,gun company might use a super
alloy steel to make a long life barrel for
a 6mm-284,or 6.5/300weatherby 1000 yard benchgun or could be used for that .50/20mm!!