.30-06 Loads

[luke5678]

Looking for some pet .30-06 loads for a new rifle. Can anyone let me know what is working for them?

Thanks

Brian

 

[retiredcpo]

165 gr accubonds over 53.5 grs of H4350
Not a very hot load We use this on a older ruger
Its a tack driver out to 500
retiredcpo

 

[roninflag]

luke- what rifle? mine shoots 50.6 varget and a 168 berger

 

[300 ultra]

58.2 GR IMR 4350 with 150 gr CT Ballistic tips.

 

[luke5678]

It's a remington 700 with 24 inch barrel. Getting new brux barrel on it and action bedded right now. When I get it back I wanted some proven loads to have ready for it.

 

[fj40mojo]

62grn H4831, 180grn Nosler Partition, Fed LR primer, Fed brass. This is a compressed load and HOT. Work up to it.gun)

 

[JPH]

Similar to RetiredCPO
57.0gr H4350 or IMR4350 with 165gr Nosler ballistic tip...very very easy. Never saw an '06 that didn't like this load...maybe 2825 fps in a 24" barrel

 

[roninflag]

on 24hour campfire there is a thread with 58 replies or so. alos on accurateshooter/6mmbr. also several articles on 30-06 on riflemans journal

 

[3006savage]

54 Grains RL17, 200 CCI Primers, 200 grain accubond, 3.41 OAL, 2720 FPS
56 Grains RL17, 200 CCI Primers, 180 grain accubond, 3.41 OAL, 2820 FPS
59 Grains RL17, 200 CCI Primers, 168 grain Ballistic Tip, 3.41 OAL, 3012 FPS

These loads are all estimated by quickload at 65kpsi so only attempt to carefully work up in rifles also chambered in 270 Win. All shoot 3/4 or better at 100 yds on calm days.

 

[njshooter]

Reloaded my Weatherby Vanguard with 57 gr. of H4350, 168 Berger VLD, COAL 3.390 which is about .037 of the lands. It shot 1.75 @ 200 yrds.