.284 absolute hammer 7mm rem mag

Joejack

Well-Known Member
Joined
Jan 22, 2020
Messages
127
Location
Se ks
Has anyone tried these yet looking for a load to start with rl23 rl26 or h4831. Also have some varget. thanks
 

just_jon

Well-Known Member
LRH Team Member
Joined
Dec 1, 2019
Messages
450
Location
Newville, PA
I’ve shot the 155 grain AH in my 7 STW with H1000. Extremely accurate bullet. I’ve got some 140s ready to test with H1000 and StaBALL 6.5.
 

Ckgworks

Well-Known Member
Joined
Mar 6, 2018
Messages
744
Location
Washington
I'm considering the same, with limited powder options.....my old barrel really like IMR4831, So I have alot of that. OP- check out this post if you haven't seen it, I haven't checked the spreadsheet on page 2 lately for 7mm data, but think there's some on it.


 

horse killer

Well-Known Member
Joined
Feb 17, 2015
Messages
84
Location
california central coast
I have used R23 with good results. Shooting 143 hammer hunter started at 63gr worked up to 68g . Using ADG brass 215 gm primers .01 jump with 66.3 R23 running 3288 f/s . I saw no pressure at 67.5 slight bolt lift at 68. But it shot better at 66.3. Good enough to kill a bull Elk at 350 yards.
 
Top