28 nosler wringing out

JMack

Well-Known Member
Joined
Feb 20, 2017
Messages
1,024
160 accubonds @100 yards 3 shots

Retumbo at book max 84.0gr printed 1" zero pressure signs

84.5gr went to 1/2" zero pressure signs.
gun is throated for 180 Bergers so I have plenty of room in case

where do you go from here 84.7? 85.0? or do I start messing with seating depth at the 84.5?

this is my first rifle with a long throat
 
Snuck out to range this morning
 

Attachments

  • 5F38F894-E612-4007-BA3B-C0F4CE6A4F3E.jpeg
    5F38F894-E612-4007-BA3B-C0F4CE6A4F3E.jpeg
    863.6 KB · Views: 154
  • 5471AB2D-FE5F-4F8E-B99D-77235A0B8772.jpeg
    5471AB2D-FE5F-4F8E-B99D-77235A0B8772.jpeg
    879.4 KB · Views: 144
160 accubonds @100 yards 3 shots

Retumbo at book max 84.0gr printed 1" zero pressure signs

84.5gr went to 1/2" zero pressure signs.
gun is throated for 180 Bergers so I have plenty of room in case

where do you go from here 84.7? 85.0? or do I start messing with seating depth at the 84.5?

this is my first rifle with a long throat
Have you done a ladder? How far does your range go out to? 180hybrids shoot very well for most. I use 195 with n570 with great results
 
Maybe I just lucked into a 1/2" group last time out.

for the length of my barrel I'm ok with this speed I'd just want to tighten it up some
 
I was looking for max in my rifle never. Did hit any pressure signs.
this was at 100 yards.
 

Attachments

  • C3CBBBA2-8119-4309-A95A-97ECB47C72B8.jpeg
    C3CBBBA2-8119-4309-A95A-97ECB47C72B8.jpeg
    932.1 KB · Views: 114
You have a flat spot in velocity from 85.5-86.0gr. I'd load up 5 at 87.7 and test for velocity standard deviation. If it's single digits, then work on seating depth to tighten up your groups.
 
You have a flat spot in velocity from 85.5-86.0gr. I'd load up 5 at 87.7 and test for velocity standard deviation. If it's single digits, then work on seating depth to tighten up your groups.
jump up to 87.7?
 
Those velocities seem really low for a 160. Most guys are getting better than that with 180's, and some with 195's. You're over 200 fps slower than the Nosler published data. What is your COAL? Could be you're loading long and getting low pressures.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top