28 Nosler/V570

shphtr

Well-Known Member
Joined
Jul 7, 2006
Messages
249
Location
Alaska
After much effort (and even more frustration) I have finally been able to corner some V570. Reloading data for this combination ranks right up there with hen’s teeth so I am soliciting recommendations for starting loads for custom Ti Rem 700 with 8.5 twist with 180 to 195 gr. pills.
I am currently initiating load w/u with IMR 8133 with guarded optimism. Thanx in advance.
 

Rhovee

Well-Known Member
Joined
Jun 29, 2017
Messages
1,272
Well it depends on what bullet and what is your coal. I had accuracy with the 195 at 80 grains. Start a few less than that and work up. Most guys run retumbo for 180s and are around 80-83. This is for custom throated chambers so without knowing your rifle it’s hard to say exactly. 80 grains with 3.750 and a 195 was 3050.
 

shphtr

Well-Known Member
Joined
Jul 7, 2006
Messages
249
Location
Alaska
Thank you for the response. I felt sure there would be more than one forum member who utilized V570 in their Nosler 28! If there are any more forum members who would like to offer any advice or suggest starting load advice/guidance I would be most appreciative as I find any information regarding loading a Nosler 28 with V570 minimal to nonexistent.
 

Recent Posts

Top