28 Nosler and 195 Berger

[Short Case]

Looking for load data on 28 Nosler and 195 berger using IMR 8133

 

[CUTTER1]

I use dirty old Retumbo. Still works for me in all conditions and both guns!

 

[Short Case]

I use dirty old Retumbo. Still works for me in all conditions and both guns!

I'm wanting for Hodgdon to come out with load data on 28 Nosler and 195 Berger

 

[Kmccord]

I'm wanting for Hodgdon to come out with load data on 28 Nosler and 195 Berger

You can find load data from Berger, send them a request, more than likely, you will need to call to get the data.

 

[Ross Douglas]

Looking for load data on 28 Nosler and 195 berger using IMR 8133

I have Reloader 33 and N570. My barrel is 28" with a 1:8.5 twist. I am currently running Nosler brass, Fed 215 primer, 83.4gr Reloader 33, and getting 3,125fps.
Nosler Brass
215 Fed primer
78.5 gr N570
3,060 fps. Both these loads are a full charge of my rifle. Start 10% below and work up.
85gr of Reloader 33 increased the velocity to 3,170 fps. That charge was leaving noticeable extractor marks. I have not gone up on the N570 charge. Both loads are shooting under 1/2 moa @ 100 yards. The powder is hard to find, so I hope this helps. I had a string of 3 with N570 with only 5 fps Extreme spread. The ES with reloader 33 @ 85 gr was around 25 fps. I believe the IMR 8133 will give similar results as the N570. I am still working on the Reloader 33, I may get the ES down around 15 fps. My OAL is 3.745. The Reloader 33 leaves a lot of carbon behind.

 

[Dmagna]

Use the search function in the forums. I am sure there is another post on the same data