270WSM 130GR Barnes TTSX & 140GR Accubond pet loads

[eship]

I'm planning to try some Barnes TTSX 130GR & Nosler Accubond 140GR in my Browning Ti 270WSM. I've heard that RL-19 works well for the 130GR and that Magpro and RL-22 work well for the 140GR bullets. I also plan to try some H4831SC. I would like to hear your pet loads for both of these rounds. Thanks.

 

[bigngreen]

I shoot 71 gr of Retumbo with the 140's and it'll run them 3341 with a 26in barrel. WARNING work up to this it is on the hotter side. I ran a full test on Magpro and it is promising for getting speed but my rifle only like Retumbo with the 140's for accuracy.
I also load a 110TTSX but use 66gr of R17 for 3670 FPS, it's a real cool little load and bullet.

 

[roadhunter]

Between the two of us, my buddy and I have four factory Remington SPS's in 270wsm with 24" barrels. The following load shoots sub moa in all the rifles, and puts the serious smack down on everything it hits! Good Luck.

270 WSM
140 gr Accubond
Win brass
66gr Reloader 22
Fed 215 GM or CCI 250's
COL 2.825"
3265 fps

 

[700xcr]

My load for the 700xcr in 270wsm
Winchester case
Winchester Large Mag. Rifle primer
67.5grs. of Accurate Arms Mag Pro
140gr. Nolser Accubond.
1/2" group at 100yds. out of my gun.
gun)