270 win ABolt 1:8 build

Codum

Codum

Active Member
Joined
Jun 26, 2020
Messages
37
Location
Georgia
New here but have been reading this forum for advise for years. Thanks for sharing your insight. I know very few are fans of the A bolts for the purpose of re-building, but I am and I sure it's going to turn out awesome.

1984 Browning A Bolt
1:8 26" fluted #5 Hawkins brake
Blue printing action
McMillen A5-3
Vortex PST 5x25
 
Codum said:
New here but have been reading this forum for advise for years. Thanks for sharing your insight. I know very few are fans of the A bolts for the purpose of re-building, but I am and I sure it's going to turn out awesome.

1984 Browning A Bolt
1:8 26" fluted #5 Hawkins brake
Blue printing action
McMillen A5-3
Vortex PST 5x25
Click to expand...
A belated welcome! I have a .270 AI semi-custom with a 30" Lilja 1:8" 3G barrel. Don't worry about what others think about your build; as you noted, it's going to turn out awesome. Upon completing your project build, please share some pictures, and enjoy it. And, of course, plenty of successful hunts. Cheers!

Ed
 
FEENIX said:
A belated welcome! I have a .270 AI semi-custom with a 30" Lilja 1:8" 3G barrel. Don't worry about what others think about your build; as you noted, it's going to turn out awesome. Upon completing your project build, please share some pictures, and enjoy it. And, of course, plenty of successful hunts. Cheers!

Ed
Click to expand...
Thanks Ed

I left off the barrel is a PAC Nor super match, and all metal cera coated burnt bronze.
 
My starting rifle and my reloading setup.
F23BAC64-B2AE-49C3-BD48-F70AA53E066E.jpeg
5756E5C1-7CD7-424D-BAE8-79FDBA19D752.jpeg
ADB7F5C5-832D-4182-B1B7-5DDF097E94C9.jpeg
32816D3E-D5A0-41ED-AD70-926D4744D181.jpeg
 
Should be nice the .270 is under rated. The only negative until recently not many high bc type bullets available as opposed to say 7 mm.
 
8FDC80C9-0736-4800-9D02-03379A537480.jpeg
6077E150-4409-45F1-B837-3362906E9558.jpeg
C7B3EEDB-FD17-4C3E-AFB0-8D53B036EB7A.jpeg


I got some berger 170 gr EOL in the mail today and seated one. See attached three mock-ups. All of these are seated to 2.770 CBTO. The berger being the longest COL at 3.473. Fits fine in my modified magazine. All of these fit in the chamber of my factory Browning. But the blunt tips on the Berger's and the Hammers hit the back of the barrel. See attached. I'll need to discuss with my gunsmith if that is something he can address so these rounds chamber fine. I need an 160 gr ABLR to see how it works at same seating depth. My goal (I'm learning here) is start with these four rounds and discuss with my gunsmith the throat depth I want to work best with these for loads.
 
I'm curious where your getting the load data from for the Sierra's? I have a 7.5 twist 26 inch barrel ordered I'm doing for my dad
 

Similar threads

T
270 win build
3 4 5
Replies
66
Views
11K
Trever
T
H
.270 Win, 1-10 twist, shoot bullets meant for 1-7, 1-8 twist?
Replies
4
Views
3K
xsn10s
xsn10s
C
308 win, browning abolt ideas??
Replies
0
Views
2K
cowboy717
C
wilkup
270 Build
2 3 4
Replies
50
Views
5K
Lenny Foffa
Lenny Foffa
M
.270 Win 1:8 Twist Barrel Coming - Tell Me How Yours Shoots
Replies
8
Views
4K
Muddyboots
M

Recent Posts

Top