Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
264 Win Mag. Powders to fill the case?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="wildcat455" data-source="post: 1824150" data-attributes="member: 102653"><p>I have tried RL33.</p><p>I have a Remington Sendero SFII in 264 Win Mag. </p><p></p><p>That load looked like this:</p><p>74 gr RL33</p><p>147 gr Hornady ELDM</p><p>Winchester case</p><p>Fed GM215M primer</p><p>Case length 2.490"</p><p>Base to shoulder 2.113"</p><p>Base To Ogive 2.767" .010" Jump</p><p>COAL 3.365"</p><p>3214 FPS</p><p></p><p>Worked up from 70 grains as no data available for this powder in this cartridge.</p><p>I consider RL33 to be too dirty for me to use in my 264. </p><p></p><p>I abandoned that load in favor of H1000, and RL26.</p><p></p><p>H1000 gets me to 3100 FPS and 1/4 MOA at 62.7 grains with that lot of powder. (The previous lot was 64 grains.)</p><p></p><p>RL26 gets me to 3150 FPS at 64 grains with that lot of powder. </p><p></p><p>All other measurements and dimensions for the cartridge are the same as the RL 33 load.</p><p></p><p>Worth it to note the CCI250 primers reduce my ES and SD for just about any load where I use RL26. Even in my 30-06. </p><p>I have no idea why, so I just go with it.</p></blockquote><p></p>
[QUOTE="wildcat455, post: 1824150, member: 102653"] I have tried RL33. I have a Remington Sendero SFII in 264 Win Mag. That load looked like this: 74 gr RL33 147 gr Hornady ELDM Winchester case Fed GM215M primer Case length 2.490" Base to shoulder 2.113" Base To Ogive 2.767" .010" Jump COAL 3.365" 3214 FPS Worked up from 70 grains as no data available for this powder in this cartridge. I consider RL33 to be too dirty for me to use in my 264. I abandoned that load in favor of H1000, and RL26. H1000 gets me to 3100 FPS and 1/4 MOA at 62.7 grains with that lot of powder. (The previous lot was 64 grains.) RL26 gets me to 3150 FPS at 64 grains with that lot of powder. All other measurements and dimensions for the cartridge are the same as the RL 33 load. Worth it to note the CCI250 primers reduce my ES and SD for just about any load where I use RL26. Even in my 30-06. I have no idea why, so I just go with it. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
264 Win Mag. Powders to fill the case?
Top