I've amassed a few extra barrel blanks in 257. I'm a barrel slut what can I say. Two things first for those interested. I'm a full time airline guy and get in/out AZ where my ranch/shop is maybe once a month with a long stay off…i'm back on my work rotation n not back to ship anything till 20 Dec or so…
2nd, none of these are must sells…so they are not deeply discounted, but they are better than any retail, at best I might put 10$ in my pocket or take a few $ loss, but thats about it. Steel is going up, Lets Go Brandon!
Heck on Bugholes Kreigers are 385$!
All .257 blanks all SS all unchambered
Proof SS Comp Cont 26" finish 1-7 320$
Proof Sendero Carbon 1-7.5 finish 24"
625$ SOLD
Brux M24 1-7 325$ SPF
Hells Canyons Benchmark core Carbon wrapped Tactical contour (close to M24)
with threaded end n protector 5/8-24"
I build a 25SAUM on this exact barrel n its a laser beam! With a little help from WTO!
Took 8 months to get this "extra barrel"
Finished at 24" No wait 750$ SPF
(My cost is over 800$ with end n shppg)
Pac-Nor (one of its last before their fire n shutting down) #4 fluted (by them) 1-8 I belive, but will need to verify, still wrapped in plastic and cosmoline/oil. 350$ SPF
Just received 2 (only 1 for sale) Bartlein M24
Progressive Gain twist 8.25-7.25 finish at 26"
500$
I might have a lighter barrel or two but need to review my build list a X-Caliber and or a Brux #3, no promises yet on those…may remain a horder on those…
If ur in the market for a 25 rifle and your serious not just kicking tires, I have a 25 Cm on a X-Caliber fluted by LRI and blueprinted 700 SA (by Kampfeld) assembled by WTO
on a McMillan A3 sporter. I built a Barreled Action to go on my Manners chassis as a comp set up in 25 CM, Defiance Deviant Tact cut and a Proof 1-7 Comp Contour with Brake all media blasted SS (nitrated bolt assembly) I'm building its replacement with a Ruckus and one of those Bart Pro Gain barrels.
In the works, 2 - 257 WBY and a 25-284.
2nd, none of these are must sells…so they are not deeply discounted, but they are better than any retail, at best I might put 10$ in my pocket or take a few $ loss, but thats about it. Steel is going up, Lets Go Brandon!
Heck on Bugholes Kreigers are 385$!
All .257 blanks all SS all unchambered
Proof SS Comp Cont 26" finish 1-7 320$
Proof Sendero Carbon 1-7.5 finish 24"
625$ SOLD
Brux M24 1-7 325$ SPF
Hells Canyons Benchmark core Carbon wrapped Tactical contour (close to M24)
with threaded end n protector 5/8-24"
I build a 25SAUM on this exact barrel n its a laser beam! With a little help from WTO!
Took 8 months to get this "extra barrel"
Finished at 24" No wait 750$ SPF
(My cost is over 800$ with end n shppg)
Pac-Nor (one of its last before their fire n shutting down) #4 fluted (by them) 1-8 I belive, but will need to verify, still wrapped in plastic and cosmoline/oil. 350$ SPF
Just received 2 (only 1 for sale) Bartlein M24
Progressive Gain twist 8.25-7.25 finish at 26"
500$
I might have a lighter barrel or two but need to review my build list a X-Caliber and or a Brux #3, no promises yet on those…may remain a horder on those…
If ur in the market for a 25 rifle and your serious not just kicking tires, I have a 25 Cm on a X-Caliber fluted by LRI and blueprinted 700 SA (by Kampfeld) assembled by WTO
on a McMillan A3 sporter. I built a Barreled Action to go on my Manners chassis as a comp set up in 25 CM, Defiance Deviant Tact cut and a Proof 1-7 Comp Contour with Brake all media blasted SS (nitrated bolt assembly) I'm building its replacement with a Ruckus and one of those Bart Pro Gain barrels.
In the works, 2 - 257 WBY and a 25-284.
Last edited:
