25-06 and 135gr Bergers

thatguyshm

Well-Known Member
Joined
Jul 22, 2013
Messages
314
Location
Maine
After researching, theres a lot of talk with little to no load data available. Rifle is twisted properly, it's a plain 25-06. Brass is new nosler, only thing I could readily find. I have most primers other then remington and Winchester.

Powders I have are:
H1000, RL23,26,16,22,4000, Retumbo, win Supreme 780, H4350, 7828 plus other medium rate powders.

Thinking of trying RL26, starting around 46gr and going up looking for pressure. Any ideas, suggestions, prior experiences??
 

just_jon

Well-Known Member
LRH Team Member
Joined
Dec 1, 2019
Messages
645
Location
Newville, PA
I was playing around in quickload when I saw your post. I was able to run data for all powders except 4000 and assumed a 24" barrel. As always, start low and you assume all liability. If you need anything further, don't hesitate to ask.
 

Attachments

  • 25-06 135 Berger RL16.txt
    2.4 KB · Views: 20
  • 25-06 135 Berger RL22.txt
    2.4 KB · Views: 17
  • 25-06 135 Berger RL23.txt
    2.4 KB · Views: 18
  • 25-06 135 Berger RL26.txt
    2.4 KB · Views: 24
  • 25-06 135 Berger H1000.txt
    2.4 KB · Views: 20
  • 25-06 135 Berger H4350.txt
    2.4 KB · Views: 15
  • 25-06 135 Berger H4350.txt
    2.4 KB · Views: 11
  • 25-06 135 Berger Retumbo.txt
    2.3 KB · Views: 18
Top