22-6mm Ackley Improved Load data needed

[SCshooter]

I have a 27.5" Encore barrel 1-9 twist in .22-6mm Ackley Improved. I am looking for load data for 75g sciirroco or Hornady A-Max or similar weight bullet. Article in Jan 08 American Rifleman by Ross Seyfried indicates good results with RL22. Can anyone help me?

 

[JohnT]

The load we run is 47.5gr of RL22 or WXR with the 80gr Sierra MK Molyed. Out of a 26 inch barrelled Savage it runs about 3400fps. Cases are WW & primers WLR. As usual start a few grains below and work up to suityour rifle. have taken it as high as 50.5gr.

Hope this helps

regards,
JohnT

 

[Texote]

Can you those loads to fireform? Do the bullets hold up or do they blow up?

 

[JohnT]

Hi Texote,

Yes I use the 47.5gr WXR load to fireform with the 80gr Sierra in my rifle, Note it is Molyed. As usual its wise to drop down a couple of grains and work up.

The 80gr Sierra MK do hold up (the 90gr Didn't in a friend's identical rig) & 80gr Amax don't always hold up either.

regards
JohnT

 

[groundhog600]

I looking for a set of reloading dies for the 22 6mm rem. ackley improved
what company would have them etc.
Thank you
DON V