210 Berger, 300 WSM, H4831SC loads?

jmden

Well-Known Member
Joined
Nov 2, 2003
Messages
2,796
Location
Washington State
Anyone out there shooting a 300WSM with H1000 with the 210 Berger or 210 SMK and fed 215 primer?

Looks like H4831SC would be the way to go using a Hodgdon Extreme powder.

Any load combos would be appreciated. Thanks, Jon

Edit: What's your OAL with said load?
 
Last edited:
H4350 and F 210s are the preferred load in the 1k comp game for the 210s.

H1000 is too slow. some are using H4831SC

MRP is also a very very good powder in the WSM

OAl will depend totally on throat of "your" gun or COAL for magazine.

BH
 
4831 SC is a VERY stable and consistent powder. If you decide to work up a load use both a Magnum and a standard Large Rifle Primer, you may be surprised at how well the standard primer does with 4831SC in what is supposed to be a magnum case. I have had some excellent results with 4831SC and CCI BR2 primers in 6.5 x 284, 7WSM, and even 338LM.

Dave
 
300 WSM, 24 inch barrel with surpressor 1-10, R22, 208 Amax BC .648, norma brass, Fed 215, 2840fps very accurate shot out to 750 yards and the 208 Amax works great on game.
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top