200 grain eldx in a 300 win mag RPR

[motrapper]

Just starting to reload this bullet
I have H1000 and Fed 215 primers Possible other powder IMR 4350
Anyone have thoughts if I can duplicate the factory Load of 2860 fps or better it
Also if someone has a 300 win RPR what are you running COAL
Dies I have are Foster Full length resizer and the Foster Ultra Micro seating die
Any suggestions appreciated
I would Like to have the Option for 1,200 yard deer ammo
Scope is 5HD 5x25 56 TMR Illum. High Mark 4 rings

 

[rharfo]

75.0 grains if H1000 is my spot but some run it up to 77-78

 

[MagnumManiac]

I ran 2 of mine up to 79g with H1000, one handled it, the other maxed out at 78g.
I wasn't using Hornady bullets.
It appears all 300WM max out around this load of 78-79g with most 200g bullets.

Cheers.

 

[171farm]

Running 77gr H1000 215m primers with the 200 eld-x @ 2950 fps out of a TC Encore.

I'd start around 75 gr and go from there

 

[motrapper]

Thanks gentleman what are running for COAL????

 

[stinkyduck13]

I'm getting a little over 2900 fps with 7828 at mag length 74 grains so far

 

[stinkyduck13]

Oh and I'm shooting 195 eldm