Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
2 shots touching with one flyer possible answer
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Clem Bronkoski" data-source="post: 2295021" data-attributes="member: 110518"><p>No that's not how you do it. You set your die as such (if it has a roll crimp built into it). Most do these days. 1. screw the die down until it touches the case mouth. 2. screw down the bullet seating screw to the desired bullet depth then lower the ram. 3. Back off the seating screw and turn the die down about 1/8th turn and run the case back into the die. This will crimp the case mouth onto the bullet. 4. With the ram all the way up screw down the seating screw until it touches the bullet. 5. lock everything down.</p><p>Now all you have to do is put a case in the shell holder, put a bullet on top and run it into the die. The cartridge will come out with bullet at the proper depth and the case mouth crimped.</p></blockquote><p></p>
[QUOTE="Clem Bronkoski, post: 2295021, member: 110518"] No that's not how you do it. You set your die as such (if it has a roll crimp built into it). Most do these days. 1. screw the die down until it touches the case mouth. 2. screw down the bullet seating screw to the desired bullet depth then lower the ram. 3. Back off the seating screw and turn the die down about 1/8th turn and run the case back into the die. This will crimp the case mouth onto the bullet. 4. With the ram all the way up screw down the seating screw until it touches the bullet. 5. lock everything down. Now all you have to do is put a case in the shell holder, put a bullet on top and run it into the die. The cartridge will come out with bullet at the proper depth and the case mouth crimped. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
2 shots touching with one flyer possible answer
Top