(2) Remington 700 Actions

Moe Curls

Well-Known Member
Joined
Aug 21, 2012
Messages
678
Location
Montana
**For Sale**

#1 New Stainless Short Action with PTG Bolt, Mag Bolt Face
Bolt has M16 Extractor and Bench Rest Firing Pin
Bolt diameter is .698 for a custom fit. Aluminum Shroud
Oversized Aluminum Knob ( Bolt was $350 from PTG)
Remington Aluminum Bottom Metal Included

**$650** shipped

IMG_0614.jpg


#2 Take Off Long Action that has been trued. The Action Face has been squared,
The Bolt Face has been squared. Lugs and Abutments have been squared and lapped.
Standard Bolt Face.
Remington Aluminum Bottom Metal included.

**$500** shipped

IMG_0613.jpg
 
Last edited:

muliemaster

Well-Known Member
Joined
Feb 5, 2010
Messages
669
Hey Moe, Is # 1 a long action also? Looks shorter then the other for some reason. Building a custom 300 RUM.
Thanks
 

Moe Curls

Well-Known Member
Joined
Aug 21, 2012
Messages
678
Location
Montana
Is the #2 a long action for a ultra mag?
After you posted I Edited the post. Thank you for letting me know I left out important information.
#2 Has a Standard Bolt Face. However the bolt face can be opened up and a M-16 Extractor installed. Also feed rails opened to ultra mag spec.
 

Moe Curls

Well-Known Member
Joined
Aug 21, 2012
Messages
678
Location
Montana
After you posted I Edited the post. Thank you for letting me know I left out important information.
#2 Has a Standard Bolt Face. However the bolt face can be opened up and a M-16 Extractor installed. Also feed rails opened to ultra mag spec.
bump
 

Trending threads

Top