Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
180 accubond 300winmag load?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="brittnunberg" data-source="post: 634510" data-attributes="member: 41011"><p>I tried most of the loads tested above, but none of them could out perform H1000 in my REM 700 with a 24 inch barrel. I loaded 81 grains of H1000 behind 180 gr. Accubonds that averaged 3140fps and shot 3 shots under 1/2 inch at 100yds. Since no two chambers are identical I would start a few grains less to be on the safe side because you can always work up. This load is close to max in my rifle. I'm using Winchester brass and Fed 215M primers. NOT RESPONSIBLE FOR NOT STARTING OUT WITH STARTING LOADS. Hope this can help you.</p></blockquote><p></p>
[QUOTE="brittnunberg, post: 634510, member: 41011"] I tried most of the loads tested above, but none of them could out perform H1000 in my REM 700 with a 24 inch barrel. I loaded 81 grains of H1000 behind 180 gr. Accubonds that averaged 3140fps and shot 3 shots under 1/2 inch at 100yds. Since no two chambers are identical I would start a few grains less to be on the safe side because you can always work up. This load is close to max in my rifle. I'm using Winchester brass and Fed 215M primers. NOT RESPONSIBLE FOR NOT STARTING OUT WITH STARTING LOADS. Hope this can help you. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
180 accubond 300winmag load?
Top