Selling the reloading components that I had purchased for a 338 Lapua Mag build that will not be coming together after all. All components are new and unopened.
338 Lapua Hornady Match Grade Dies $70
50pcs 338 Lapua ADG brass - $110 TYD
My son and I spent some time in the reloading room working on a solid load for his Ruger 6.5PRC. I think we have found the load. Using once fired Hornady brass, hodgdon H1000 powder at 57.4gr, Hornady 147gr ELD Match leads and CCI 200 primers. We used the RCBS full length sizer just to push...
Hornady 6.5 Creedmoor 1x-fired Brass in factory boxes. Brass is real clean, it is fired and placed back into factory boxes. Have Plenty available. Priced to move.
200 pcs in boxes $55.00 shipped
500 pcs in boxes $120.00 shipped
ALSO HAVE 500 PIECES BRASS IN WHITE MATCH BOXES THAT WAS ORIGINALLY...
Hornady 6.5 Creedmoor 1x-fired Brass in factory boxes. Brass is real clean, it is fired and placed back into factory boxes. Have Plenty available. Priced to move.
200 pcs $55.00 shipped
500 pcs $120.00 shipped
1000 pcs $225.00 shipped
Hornady 6.5 Creedmoor 1x-fired Brass in factory boxes. Brass is real clean, it is fired and placed back into factory boxes. Have Plenty available. Priced to move.
200 pcs $55.00 shipped
500 pcs $120.00 shipped
1000 pcs $225.00 shipped
On bergers web page it lists a 1:10 twist rate. Is a 1:8 going to be too fast? 225 ELDM's are calling for a 1:9. Gun would either be a 300 prc or a 30 Sherman Magnum. Thoughts.
Here is a picture of a .308" 180 Nosler E-Tip, .308" 230 A-Tip, and a .264" 153 A-Tip.
With the 230 seated in a .300 Win Mag case to where the beginning of the shank is even with the bottom of the neck, I got a coal of 3.83" (if I did my "Jethro syphering" correct). If seated to 3.34" COAL...
Hornady 6.5 Creedmoor 1x-fired Brass in factory boxes. Brass is real clean, it is fired and placed back into factory boxes. Have Plenty available. Priced to move.
200 pcs $55.00 shipped
500 pcs $120.00 shipped
1000 pcs $225.00 shipped
Down to last 1000 pieces boxed, after that pieces will be...
So I just got my 300 prc built a few weeks ago and have been shooting factory hornady match 225s. I wasn’t getting the accuracy I wanted so I got a die and started doing some work up. I found a load my gun really liked at 79 grains of retumbo I set oal to the same as the factory stuff. Shot a 3...