22 creedmoor

Joejack

Well-Known Member
Joined
Jan 22, 2020
Messages
201
Location
Se ks
Anyone willing to post or pm me so starting reloading data for 22 creedmoor 77gr 80gr 90gr and 95gr bullets. I have RL26 rl23 h4831 h4831sc. Thanks doug
 
Here's a thread I started on this same subject a couple weeks ago. I ended up using 39.7gr of H4350 and a 77gr Berger OTM. Might be some info in there you could use. Good luck!👍

 
Here's a thread I started on this same subject a couple weeks ago. I ended up using 39.7gr of H4350 and a 77gr Berger OTM. Might be some info in there you could use. Good luck!👍

 
I should have my barrel and dies and barrel nut wrench and go and no go gauges next week
 
It will be a 1/7. On a nother forum I seen guys having trouble with 1/6.5 blowing up 90 & 95 grain bullets running over 3150
 
Jumping on this thread. Looking for reloading data for 22 CM with H4350 or H1000 with 69gr Barnes BT Match. Anyone have a good start point? Thanks
 
I had a good load with h1000 44.4 grains was running 3250 but I was using 85.5 Bergers instead of the lighter bullets. David
Thanks David! I have some options i have been looking at basing off a 22-250 AI load for the same. Thinking i start with the 22-250 AI load and work up from there.
 

Recent Posts

Top