VLDs Don’t Fit in Ammo Case

Saw this and was really impressed

www.tabgear.com

Bullet Binder

Have you been looking for a way to carry your rounds so the bullets do not touch each other? If you go to the trouble of using a bullet pointing die to uniform each bullet tip you don’t want them banging against each other after going to that much trouble. The TAB GEAR Long Action Bullet Binder...
www.tabgear.com www.tabgear.com
 
General RE LEE said:
Ok so this is random but I loaded up some 168 grain Berger VLDs in my 7mm STW. I did the various seating depths per Berger's instructions and the top won't close unless I force it on my MTM ammo case. It lists the 7mm STW as a compatible cartridge for the box but I'm assuming the long VLDs seating far out are well beyond SAAMI COAL for the 7mm STW.

Will having some pressure on the bullet tips from the plastic box mess up the seating depth or tips?
Click to expand...
Just drill some small holes on the lid. Keep your ammo from rattling.

🤯🤣
 
General RE LEE said:
Hornady OAL Length gauge with a once fired modified case. COAL is 3.970 to touch lands, CBTO is 3.258 to touch lands with a 180 grain Berger VLD
Click to expand...
Your COAL of 3.970" will definitely fit. I loaded a 190 Berger in .30 LARA (8MM RM improved case) with a COAL of 3.980", went to Scheels, and tried it bullet down, and it fits.

MTM H-50 XL case.JPG

MTM H-50 XL.JPG
 
General RE LEE said:
Ok so this is random but I loaded up some 168 grain Berger VLDs in my 7mm STW. I did the various seating depths per Berger's instructions and the top won't close unless I force it on my MTM ammo case. It lists the 7mm STW as a compatible cartridge for the box but I'm assuming the long VLDs seating far out are well beyond SAAMI COAL for the 7mm STW.

Will having some pressure on the bullet tips from the plastic box mess up the seating depth or tips?
Click to expand...
Drill little holes in the box for the bullet tip to stick through. Just kidding.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Similar threads

General RE LEE
Baffled: VLDs Seating Into Case No Effort
Replies
3
Views
658
Bob Wright
Bob Wright
D
Sized case won’t fit
2 3 4
Replies
48
Views
7K
rsnell
R
E
Crush fit cases for accuracy?
Replies
5
Views
3K
Boss Hoss
Boss Hoss
G
Powder I don’t use.
Replies
2
Views
782
Goose71
G
Squatch
95 grain vlds in 243 win
2
Replies
17
Views
5K
Beelzebub
Beelzebub

Recent Posts

Top