6.5 CM hunting bullets

JMB 1911

Well-Known Member
Joined
Mar 8, 2019
Messages
161
Location
Connecticut
So I bought my 6.5 CM so I could shoot and practice long range. I worked up a great load for 147 ELDM. Now I want a hunting load. In my .270 I have been using LRX which is awesome. The purpose of the 6.5 is long aerodynamic bullets so I don't see the logic in going to the lighter monolithic solids for it. Can the lack of of BC be compensated by the additional speed or should I go with the Accubond , ELDX or some other cup and core high BC bullet
 
So I bought my 6.5 CM so I could shoot and practice long range. I worked up a great load for 147 ELDM. Now I want a hunting load. In my .270 I have been using LRX which is awesome. The purpose of the 6.5 is long aerodynamic bullets so I don't see the logic in going to the lighter monolithic solids for it. Can the lack of of BC be compensated by the additional speed or should I go with the Accubond , ELDX or some other cup and core high BC bullet
Not sure what you're wanting to shoot with it but the 147s work great in game, especially at Creedmoor velocities.

John
 
I shot antelope with the 147 this year because they are light boned and skinned fairly easy to kill. The performance is absolute garbage. They started coming apart when they hit hair. Would not even fully penetrate the off side rib cage. Entrance wounds looked like exits I would not want to shoot a big deer with it or shoot head on or angling to shots
 
You may scoff at this idea, but I have great success with 110 grain Hammer Hunters with my 6.5X47. Two loads with consistent accuracy yield 3048 and 3134 respectively. The latter load produces SD 1 and ES 3. Devastating too on deer size game.


Mr. rick which powder are you using with the hammers

Thanks

Buck
 
I ya e to disagree with the 147 being good on game I ran those at first and can tell you they do not perform all that well on a wide range of game.
As for Bullets you are correct in the long high bc is great in the creed but that's for targets.
I can tell you you can not find a better hunting bullet than hammer.
Here's how I look at it. I can run the heavies for game but they tend to hit the bottom limit of the opening operational point of velocity at about the same distance as the hammer. So yes the hammers will not compete on steel at 1000 yards but the added speed at the start puts the min for those to open about the same as the heavies. So why give yourself more drop do deal with than needed for hunting. My creed with hammers is my main go to bullet and rifle for hunting. That being said sometimes you have to remember to know when it's out of its league and you need to step up in cartridge size.
Hands down hammer 124gr is the best bullet I e used out of it period. And that taking somewhere between 20-50 animals a year depending on season.
 
Mr. rick which powder are you using with the hammers

Thanks

Buck
from 100, 200 and 300 yds

009C4912-97BD-4799-A797-DBF848B02DC2.jpeg105CE48F-031E-40C1-8983-5527769BB3E4.jpeg3F0E6B2A-DA80-4118-85C3-630C917F168A.jpeg4FAB732D-8F22-410A-8792-5D6BE02ADD8A.jpeg
 
If you are an under 300y hunter the 140 accubond pushed with RL26 will be pretty effective. I can run it up to 2900fps before I run out of powder space (in nosler brass). Pretty decent performer for normal ranges.

I like the 127lrx out of my 26N but I dont think the 6.5cm is fast enough to need a copper mono, or really make a 127gr copper mono work that well past 200ish yards.
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top