Badlands Bulldozer Bullet in 6.5/264?

Following.
A lot has happened since I contributed anything to this thread, I started a different one for all the Badlands bullets. There is a ton of info here, a good bit of terminal performance stuff including pics, and lots of other info. This next season there will be more, as I will be using the .338 cal 250 SBDII, my cousin and his wife will both be using the .277 140 SBDII, and my wife may be using the 7mm 160 SBDII, not to mention all the other people on that thread. Here is the link -

 
Any more news on the performance on these bullets? Been working up a few loads for California Deer in my 243AI
 
Any more news on the performance on these bullets? Been working up a few loads for California Deer in my 243AI
I loaded some up for my 260AI and shot an Axis doe at about 40 yards. She was quartering to and I put it on the point of her shoulder. The bullet was not recovered but the internal trauma was massive. She did manage to run about 60 yards before piling up as I recall.

I don't know if they changed design between the start of this thread but Bulldozer 2 bullets do not pressure up quickly, at least not in my 7.5 twist Brux barrel. I have them shooting 3150 from a 24" barrel and can drive them faster. There was a good node at 3150 so I stopped there for the time being.
 
I loaded some up for my 260AI and shot an Axis doe at about 40 yards. She was quartering to and I put it on the point of her shoulder. The bullet was not recovered but the internal trauma was massive. She did manage to run about 60 yards before piling up as I recall.

I don't know if they changed design between the start of this thread but Bulldozer 2 bullets do not pressure up quickly, at least not in my 7.5 twist Brux barrel. I have them shooting 3150 from a 24" barrel and can drive them faster. There was a good node at 3150 so I stopped there for the time being.
Perfect this helps. Appreciate the info
 
Top