- Joined
- Dec 28, 2007
- Messages
- 317
what redding bushing are you all using with 6.5 prc adg brass? loading for the 156 eol
6.5 prc, adg brass, type s redding bushing
- Thread starter rockwallraider
- Start date
Help Support Long Range Hunting Forum
Buxndiverdux
Well-Known Member
I'll look tonight. Running same specs.
- Joined
- Dec 28, 2007
- Messages
- 317
appreciate it
Buxndiverdux
Well-Known Member
I was able to look up my order history in email. I ordered the .291 titanium nitride bushing. A loaded round for me in 6.5PRC ADG brass with 156EOL measured .293.
But I did notice some different bushing sizes posted elsewhere that caused me a bit of a head scratching. The only thing I could assume is possibly different lots of brass? Best to measure a loaded round to make sure.
But I did notice some different bushing sizes posted elsewhere that caused me a bit of a head scratching. The only thing I could assume is possibly different lots of brass? Best to measure a loaded round to make sure.
- Joined
- Dec 28, 2007
- Messages
- 317
i saw what you are referring to like .289 or so which was weird, thats what a creedmoor is. i have some hornady factory ammo that is way closer to your number and I figured adg was a hair thicker than hornady. thank you
A 291 ti-N bushing will measure close to 290 due to coating.
