Case lube

Elkeater

Well-Known Member
Joined
Dec 3, 2017
Messages
1,418
whats everyone using? I've been using Hornady case lube but it's recently giving me issues so I went back to my old Lee case lube but I'm about out of that so time for a new product.
 
just out of curiosity what were the issues with hornady one shot case lube ?

I switched over to a Redding FL sizer and when I did I started getting stuck cases. I cleaned the die and it's still happening. No issue with the lee case lube it's just not as fast and clean as the Hornady.
 
if you're using one shot spray lube , be sure to follow the directions . the directions call for a short waiting period , to allow the lube to dry . I used one shot with good results on shorter cases like the 222 , or 308 . I never had much luck with longer cases , like a 7mm rem mag , or 300 wby . I'm using the RCBS lube on a pad that I roll the case through . I then wipe the lube off by using carb cleaner on a rag . not as easy as spray lube , but I haven't stuck a case since I went back to the lube pad . I've noticed the shorter cases size with less effort , more consistent shoulder bump too .
 

Recent Posts

Top