300 WSM Chambering

Ran the numbers from Bergers sight a 210 is
1.47 O.A.L - .209 Boatail = 1.279
300 wsm case to Nk junction 1.802
1.802 +1.279 = 3.081
Baney box would work fine.
 
The guys who are pushing the was hard with heavies, what brass are you using? I'm having a Tikka long action built with a stiff 23" summit carbon barrel from hells canyon. I want to push a 215 at 2900 if possible. I plan to try Bertram cuz it's tough as nails, but not do consistent. What's your favorite 300wsm brass?
 
The guys who are pushing the was hard with heavies, what brass are you using? I'm having a Tikka long action built with a stiff 23" summit carbon barrel from hells canyon. I want to push a 215 at 2900 if possible. I plan to try Bertram cuz it's tough as nails, but not do consistent. What's your favorite 300wsm brass?
Norma
 
The guys who are pushing the was hard with heavies, what brass are you using? I'm having a Tikka long action built with a stiff 23" summit carbon barrel from hells canyon. I want to push a 215 at 2900 if possible. I plan to try Bertram cuz it's tough as nails, but not do consistent. What's your favorite 300wsm brass?

Norma for me. I bought a hundred cases 9 years ago and I'm still using them. I don't even know how many times they've been fired. I anneal and fire them until the primer pockets get loose.

The only cases I've discarded are the ones that I pushed a little too hard while finding pressure. And even then I got double digit loads on them.
 
Warning! This thread is more than 5 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top