6.5 Creedmoore
- Thread starter johnp034
- Start date
Help Support Long Range Hunting Forum
140 ELD-M, CCI450, Lapua SRP, and 26" with TBAC Ultra 9.
I still was at no pressure I had to stop cause I was getting powder over top of case mouth lol
wbm
Well-Known Member
.._
Last edited:
No sir I have not. I do not shoot without a can EVER!! Lol
Hopefully someday I will be able to say the same thing. LoL
I am using the same combo, just not with rl 26 yet (I have a small stash of RL 26). Is 46gr. a safe level to start at? Loads that compressed give me the chills.... Very impressive velocities I must say.
I went up to 49.9 gr. 46 should be very safe brother
I mean your rifle seating depth will obviously dictate how compressed you are going to be vs. my rifle so yes start low but I started in the 45 realm with 5 creedmoors and all were fine. The shorter throated guns started hitting a little pressure around 48 gr mark. RL26 compresses very good, but I do use a old electric tooth brush and hold against case prior to seating bullet. The vibration seems to work very well to settle the powder.
cohunt
Well-Known Member
it seems like h4350, varget and RL16 are the most often used powders-- RL26 would be great if it could be found . seems most are shooting the 130-140 class bullets
I'm thinking of trying some 110 HH bullets, I checked with steve and he said they had luck with varget--anyone else load the light 110 HH bullets yet?
I'm thinking of trying some 110 HH bullets, I checked with steve and he said they had luck with varget--anyone else load the light 110 HH bullets yet?
Kansaswoodguy
Well-Known Member
- Joined
- Aug 26, 2014
- Messages
- 773
I run 140gr bullets H4350, Superformance, and 4831SC the 4831SC was actually the most accurate powder for me if I was shooting inside 600yds it would be my accuracy load it simply lacked the speed I was looking for to shoot 1000-1200yds.
