OH58DViper
Well-Known Member
RBROS 338 RUM.
TRADED - TRADED - TRADED - TRADED - TRADED - TRADED - TRADED - TRADED
can't edit the title for some reason.
Definace LA with cut out center section
Manners PRS 1 Bedded by Rbros
Timney Calvin Elite @ 1.5 lbs
28" Proof Sendero - 1:9.4 twist - seamless 3 port brake
49.5" end to end
8lbs 14oz without bipod or optic
Threaded 5/8 x 24
Throated for 250 Bergers, see Rbros Target, but hammers with 285's as well.
Cerakoted Tungsten
Thumbwheel for cheek rest
I have Redding dies with three different TIN bushings and the whidden expander kit in .001 increments, that go with it.
67 rds fired, mainly ladder tests for 285's and 250's. I was testing 260 hammers and broke the erector lens on my Minox. I've decided I'm getting out of 338's, I had shoulder surgery on my shooting arm and it doesn't like em anymore.
Looking for 30 cal or below, full custom, under 8lbs, but prefer close to 7. 300 RUM, 300WM, 28Nos, 6.5 SAUM, 6.5 PRC etc.....nothing under 6.5 PRC. I can add money or take a partial trade and cash.
My groups were shot left handed due to shoulder surgery, the 250 Bergers shot pretty well with Travis's load
MV 3061 3058 3051 3068 3049 3058
ES 19
SD 6.5
2 x 3 rd GROUPS 1.59" @ 307yds and 2.09" at 418yds
But I had a 1000 285 Eld-m's so I worked up a load for them going 2810 FPS. Like I mentioned earlier I'm getting out of 338's completely.
My group shown was shot left handed so your shooting will probably be better. Still 3/8 MOA Lefty ain't bad ha.
Let me know what you have and thanks for looking.
TRADED - TRADED - TRADED - TRADED - TRADED - TRADED - TRADED - TRADED
can't edit the title for some reason.
Definace LA with cut out center section
Manners PRS 1 Bedded by Rbros
Timney Calvin Elite @ 1.5 lbs
28" Proof Sendero - 1:9.4 twist - seamless 3 port brake
49.5" end to end
8lbs 14oz without bipod or optic
Threaded 5/8 x 24
Throated for 250 Bergers, see Rbros Target, but hammers with 285's as well.
Cerakoted Tungsten
Thumbwheel for cheek rest
I have Redding dies with three different TIN bushings and the whidden expander kit in .001 increments, that go with it.
67 rds fired, mainly ladder tests for 285's and 250's. I was testing 260 hammers and broke the erector lens on my Minox. I've decided I'm getting out of 338's, I had shoulder surgery on my shooting arm and it doesn't like em anymore.
Looking for 30 cal or below, full custom, under 8lbs, but prefer close to 7. 300 RUM, 300WM, 28Nos, 6.5 SAUM, 6.5 PRC etc.....nothing under 6.5 PRC. I can add money or take a partial trade and cash.
My groups were shot left handed due to shoulder surgery, the 250 Bergers shot pretty well with Travis's load
MV 3061 3058 3051 3068 3049 3058
ES 19
SD 6.5
2 x 3 rd GROUPS 1.59" @ 307yds and 2.09" at 418yds
But I had a 1000 285 Eld-m's so I worked up a load for them going 2810 FPS. Like I mentioned earlier I'm getting out of 338's completely.
My group shown was shot left handed so your shooting will probably be better. Still 3/8 MOA Lefty ain't bad ha.
Let me know what you have and thanks for looking.
Last edited: