Recent content by TwoMore

I would call this flash hole de-burring, uniforming would be making sure the flash holes are all the same size and thickness, I also sort and tru up the brass that I am target shooting with a .083" reamer and de-burr lightly after I set the base thickness from the inside with a long endmill...

Nightforce SHV is a great option :) good luck:cool:

I have a friend who sent a 270 win down a 7 RM once, it blew the shoulder open and sent crap out the pressure hole but he was not hurt

270 win is .284 longer at the shoulder than 270 wsm, the wsm is almost .100 bigger in diameter at the shoulder so it wouldnt even start to chamber

lol I hear that, I am the same way. but it is a short walk to my machine shop lol so I am usually digging through drawings, reamers and throaters and neckers at midnight to see what I can conjure up lol

I shoot rem brass in my edge and never had any problems. I would look into magmans post and check either my firing pin or spring, sometimes the pin can get dirty at the shoulder and keep it from fully protruding or the spring can get weak. one question is did you prime the cases when you...

3200 is what my factory barreled 7 RUM shoots the 180 with retumbo lol Rifle building is just like a building good race engine, at some time you just have to quit counting the money lol :D

this is a pretty old thread but wow those are some fast barrels, my 7 RM is shooting the 168 around 3080 with a 28 inch Kreiger, and my 7 ultra rogue (RUM AI) with a 30 inch barrel is running just north of 3200 with the 195, now the rogue will spit the 168 out at 3420 but the throat is set up...

I dont really know, just posting for a friend, I am sure he would listen to offers thanx :)

One thing that is different today rather than in the 90s or even 2000 is that more and more folks can build more of the rifles ourselves. I will admit, when I built my big seven I had studied both the lazz and Allen mags and choose the RUM brass just for the cost of the receiver and brass. I...

I have a friend who has 310 pieces of new Norma Brass, all the same lot that he wants to sell for $450.00. his Phone numbers are 601 209 8211 cell or 601 859 8646 home ask for Buster :) thanx for looking.

and it smells funny and gives me a headache! :p:D

https://www.terminusactions.com/product/apollo-lite-ti/ or https://www.terminusactions.com/product/apollo/

I may build one cuz of the optimum efficiency:D dont tell Mud!!:D Ill just call it a 6.5 incognito lol

on my four cell cams "Bushnell aggressors" the field scan wont transmit pics you have to retrieve the card. I have also used spy-point and moultrie none of them transmitted live pics unless the motion sensors were tripped. I use the caldwell target cam it it does great