Recent content by St_Gunner

  1. S

    Tough High BC bullet for .270

    Jay, I wouldn't have a problem with it on deer, I used to shoot them with a 100gr speer hotcore coming out at 3200fps. Just lay em flat. Deer are easy to kill. This hog probably had gristle plate an 1" thick the bullet had to enter and penetrate, if it smacked a rib on a hog that size they...
  2. S

    Tough High BC bullet for .270

    I'm looking for a tough bullet for this rifle, I went out tonight and made a 400yd shot on a large boar hog with a 135gr SST leaving the muzzle at 2950fps. The bullet impacted just behind the leg and should have angled the bullet into the vitals and into the offside front leg. I was shooting...
  3. S

    SOLD/EXPIRED Reloading stuff San Antonio Texas area.

    All powder and Primers have been kept in Coolers in airconditioning. I don't want to ship, but if you are willing to pick up the shipping cost, I will, but it seems it will be at least a $20 hazmat on the powder and primers. I'd prefer to meet you face to face and sell this stuff, cash or...
  4. S

    Group and reloading question?

    Thanks for suggestions. Harv, I bought the H1000 to try in a Shilen barreled Mauser action .270 a few years ago. It took my 3/4moa 130gr speer groups and cut em to just under a 1/2moa. I've always used CCI mag primers of Federal match in the loads. I've tried both 135gr sierra match and the...
  5. S

    Group and reloading question?

    Remington Sendero in .270 Winchester Weaver V16 scope I loaded some SST's I got a few months ago 135gr. I'm a half grain below max with H1000 powder, 63.4 grains, shooting CCI mag primers, out of Remington cases(3 handloads on these cases and one factory). I turned the case necks after the...
  6. S

    ATN 4-12X 60mm (Illum.) 30mm Tube w / Rings *

    Thanks folks, hadn't heard much about their scopes, heard their night vision was decent, but not much on anything else. Steve
  7. S

    ATN 4-12X 60mm (Illum.) 30mm Tube w / Rings *

    ATN 4-12X 60mm (Illum.) 30mm Tube w / Rings * Anybody ever tried these? Do they repeat well? Is the glass any good? Do you have any problems with them? Any advice? <BLOCKQUOTE><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><HR>ATN's innovative bullet drop compensation...
  8. S

    ballistic coefficients?

    Thanks Darryl, appreciate it.
  9. S

    ballistic coefficients?

    Question... 135gr sierra match I have listed at .435bc, which seems to be about right for drop at the velocity I have been shooting out to 500yds. I just was given a couple boxes of 135gr sst's and was wondering if anyone has a BC for those bullets in .277caliber. I'll be pushing them...
  10. S

    Long Range Hunting Bullets

    The_Mountaineer, Go to the local steel shop, I bought a piece of 1" thick steel plate that was 24"x36" for $33, it weighed 333lbs, so it wasn't real easy to move around. I cut it into a couple targets, some 6"x6" squares and some human torso 18"x18" chest with a 6"x6" head. I welded some 2...
  11. S

    Check this out people

    First off I aint here to cause a stink, just to talk about this, away from putz's who want to legislate away stuff they disagree with. Boyd, you did commendable under the circumstances, I might have asked him if he wanted to attend a duel as a participant. Bruce, I think far and away on the...

Trending threads

Top