Recent content by Simple11

I’ve used 75gr hornady tap factory ammo, 75 gr gold dots factory ammo, and I believe a makers 62 gr bullet with great success on South Georgia whitetail deer, coyotes, and several hogs. I pick my shots and keep my shots within 200 yards. Each of the above 223 bullets have performed well and I’ve...

I’ve used bolt action 223’s and 22-250’s for several years now. I hunt middle Georgia so the average buck is 145lbs and the average doe is 115lbs. I’ve kept my shots under 200 yards and usually try and put the bullet in the upper neck area. I use a factory 75gr gold dot for my Remington 700 223...

I have a Remington 700 223 that’s been trued and a 1/7 muller works barrel installed. Timney trigger. Stockys stock that’s bedded. Nightforce 20 moa base. Mark 4 30mm medium rings. Leupold Mark 4 4.5x14 optics. And I run a SICO omega suppresor on it. I’m shooting 75 gr hornady tap hand loads...

I have a 260 and a 6.5 creedmoor. I shoot hornady 130gr eldm in the 260 and hornady 147gr eldm with the 6.5 creedmoor. I’ve shot 5 whitetail deer with the 130 eldm and every deer shot either dropped in its tracks or ran less than 50 yards or so. When the deer ran after being shot there was a...

I have the MPR chambered in 308 with the 16” barrel and the Mesa long range chambered in 6.5 creedmoor. The 308 will shoot 1/2” five shot group at 100 yards all day long with the hornady eldx 178gr Ammo. The 6.5 creedmoor will shoot 3/4” group all day long with hornady eldm 147 gr Ammo. I run...

I’ve used my 6.8 spc’s, 450 BM, and 44 mag. I’ve used several 223’s / 556’s. All have worked pretty good. The 6.8 spc is the only one I’ve used at night with NV set up on it. All shots were within 100 yards. The 44 mag was 45 yards out.

I was a 300 win mag fan for years. I still am for that matter. A buddy of mine talked me into building a 30-338 win mag. I’ve got a m700 action that’s been trued, 26” 1/10 twist Douglass barrel, hs Precision stock that’s bedded, Leupold Mark 4 6.5x20, triggertech trigger, and run a Silencerco...