Recent content by Sika Slayer

Thanks for the reply, it was most helpfull. Just wondering if leica will eventually have an update that will have a G7 ballistic solver on board in the binocular rather than using another device, the whole reason for me is to have one device rather than having a binocular and a range finder to...

Hi there, I am thinking of purchacing these rangefinder binos in the near future, can anyone that already owns these help me with some of the ballastic functions. After installing your own custom curve through the leica ballistic app and setting your bino in the mode to take account air pressue...

Can you pleases post the link as I could not find it, but I did see they have a duplex illuminated.

I know that Leupold vx5 do not come with the wind plx dot as a choice, will their custom shop fit one for you if you request it ?

Thanks for the reply, that's great to hear, if that is correct about the Binos, I would be interested in getting a pair in the future as not having the M.O.A reading was a killer for me.

Does anyone know if the new 2700 B reads out M.O.A measurements when using information off the SD card. As the Leica hdb binoculars would only give you a readout in clicks, not M.O.A.

Anyone using a pulsar xp28 helion thermal viewer

No its not the same, the point of impact was 2 inches low at 300 yards and 1 1/2 inches high at 500 yards after I adjusted the scope to what the range finder told me to adjust, 2 M.O.A up for the 300 yard range and 7.5 M.O.A up for the 500 yard range

My scope is 1.9 inches high, I have put this into the G7 BR2.

I have tried adjusting the B.C and the velocity so that the point of impact is correct say at 500 yards but at 300 yards the error increases and point of impact becomes even lower. I have a new VX6 3-18 on the rifle.

I was using my G7 on the range the other day, caliber was .284 AI, speed Approx 2830 fps, projectile 162 g A Max. 0 was set at 200 yards, at 300 yards it was grouping about 2 inches low but at 500 yards it was 1.5 inches high. If I adjust the speed so it matches at one of the ranges the other...

I am in the process of having a gun built in .280 AI (SAAMI spec ) I have started looking for dies, what do you recommend .

I shot this at 545 yards yesterday, I am quite pleased with this load now.

last test I got 3108, 3108, 3102 3104 3120 MV Can you tell me how to work out the SD for these five shots thanks