Pdyson's latest activity

PM SENT

IMO Hornady is fine for range brass, not something I'd work up a load for hunting or a match with personally. I stick with ADG #1 and...

I agree with your top choices. Lapua is number one and Apha a close second and Peterson belted mag brass is second to none. Plus...

Don’t get me wrong, Lapua brass is good stuff. With that said, 41.5 grains H4350, CCI BR-2s, 140 or 147 ELDMs and an accurate Tikka CTR...

6

I saw a video on backfire that noted how big the velocity lies are on the 7PRC factory ammo. Box says 3000fps from a 24” when actual is...

Wow! 10-thou swing on the bump is serious. I use one shot all the time and Redding wax too but haven’t experienced the issues you...

i like to jump bullets because a bullet stuck in the bore will ruin my hunt. Start at least 20 thou from jam and go .006 increments...

Checking my old reloading notes from the 1980s my best 100-120gr loads were with imr 4350.

It is a bolt gun I built from a 28” Shilen Savage prefit I bought from LRH member Yotekilla250 back in December. The SMKs are 1.585...

Varget may not be the fastest powder in the ARC but in my gun it just works.

Selling a lightly used Pulsar Thermion 2 XQ35 pro. Excellent condition, all paperwork and accessories are included...

Try bumping the shoulder back some more (cam over)

Are you sure the insert for the caliber you are using is not moving? Is the screw tight? FWIW, I don't have that problem.

It was running kinda slow Monday, thought it was my internet connection. Was down this morning but seems to be back up now.