Recent content by OFFISHN

They removed/cleaned the glass. I just didn’t want to get aggressive with it.

Nightforce NXS 12-42X56 SFP with sunshade and UV filter. No ZERO stop or illumination. I recently sent this scope in to nightforce because there was a smudge on the eye piece glass. I thought it was internal put they called to say it was external. They cleaned the scope and gave it a good bill...

Wow. Lucky no one was seriously hurt.

Still available? What form of payment do you use.

I came away from this last weekend with an ES 10-11 and an SD 4-5 for a five shot group. Two things I have come to believe helped is second firing after annealing. Cleaning the ID of the neck prior to seating and shooting a dirty barrel. Approximately 20 rounds down range before heading back out...

Yes every third firing. Not sure I have noticed any difference before or after other then neck tension after annealing seams to be lighter due to softer brass.

I thought I would share some of the 100yd groups these rifles have produced. I actually learned a few different things from those who responded. Thank you! I recently started stretching the legs on both these rifles. The creedmoor with the current scope has enough MOA to shoot out to 1300. I...

Nope that’s good info.

Thanks. I’ll try and find some of those primers to test. I’ll look into those powders as well and start using a dry lube for bullet seating. I open to just about everything to get consistency with in single digits.

Thanks. I do have a beam scale I can and have verified on every once in a while. I calibrate my scale after warm up every time even thou it’s in a temp controlled room constantly. I’ll give the dry neck lube a try. Are you just dipping your bullets in lightly before seating? Or just making sure...

I have been reloading for many years and struggle with consistently achieving single digit ES and SD. I use a lab radar with the magnetic trigger and rarely not capture a shot. My reloading practices is good brass (lapua) CCI primers 200 or 250 depending on the caliber (6.5 creedmoor or 6.5 PRC)...

I have the AB Raptor 6 in 30cal. Absolutely love it. You can buy additional adapters for different thread pitch’s so it will mount to your other rifles. Sound suppression is excellent. Weight is minimal.

TTT

Christmas special. Get it in time. $400

Will these except the trigger tech triggers. And do they require a special stock or will any 700 SA stock work?