I was mainly wondering if there was some simple fix that I had not heard of. I have an M1 carbine that has a few faulty mag springs. These are a bit harder to come by, especially now in NY state
Looking to get a new rangefinder(currently have the Busnell Scout arc 1000). I would like to be able to range deer and trees out to 1000-1200yds. I've been looking at the Vortex Ranger 1500 and the Sig Sauer Kilo 2000. Thoughts and suggestions please
Gunworks of central NY is in Verona- near Utica. They do a lot of Remington recalls and repairs. You might try them- Phone: (315)363-7041 Email: [email protected]
I go to
Schultheis Sporting Goods IncArkport, NY
(607) 295-7485 Ask for Denny Shay
I have a Rem.700 vls in 22-250 and have shot 55 grain Nosler spitzers with 34 grains of 4064 with okay groups. Looking to tighten groups and shoot out to about 500yds. I'm not sure what twist the barrel has. Anyone know what most of the vls 700's had? Thanks
Anybody having good luck with 300 win mag loaded with 208 amax and reloader 22? What powder charges should I try? Fired out of Rem7005r with a 26" with 1-10 twist
I have tried h1000 loads with no luck
Going to give reloader 22 a try. Has anyone had any luck with imr 7828? I bedded the action lug with no real improvement. I tried another scope(cheap) and saw some difference -not a ton but decided to send the vortex back for a checkup before burning more ammo. I should get the scope back in a...
Yes, I was thinking of giving the optics a try on another rifle as well. Waiting to try a different powder and shoot after action lug is bedded... will then give it a go if problem continues
Thanks
The break was installed, checked and re checked by smith.Rifle had same accuracy w/o a break
Seating depth has been tested from book spec-.010 off lands
Action contact on stock looks good and barrel is free floated(I'm bedding in the action lug now)
Powder and primers maybe. What to try...
The action contact on the stock looks even, and the recoil lug is seated back in its mortice. I have been torquing the action screws to 50in/lbs. The barrel is free floating. I have messed around with seating depths from book spec. to .010 off the lands. I was thinking powder and maybe primers...