Lonewolf74's Recent Activity

  1. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Thanks for this info. So you have found that the rough seating depth sweet spot holds across different charge weights but you may need...

    Feb 16, 2018 at 10:45 PM
  2. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Rich that is a great example. What really floors me is the Fed's match primer with the most consistent velocity having the second...

    Feb 16, 2018 at 7:17 PM
  3. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    JE the link you posted is the chart I found last night. Now along with your rule of thumb on case capacity will you steer more towered...

    Feb 16, 2018 at 10:21 AM
  4. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    I want to say thankyou JE and all of you for your vast knowledge and experience. I have only been at this for a year and am by no means...

    Feb 16, 2018 at 10:11 AM
  5. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Barefoot thanks for the link it was info like many that I looked at. Pretty much all the info I have looked at agrees that Fed and CCI...

    Feb 16, 2018 at 9:14 AM
  6. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Or better yet could you post a list of what primers you have found to work best with different powders, or range of burn rate?

    Feb 16, 2018 at 6:08 AM
  7. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Ok JE where can I find a brisance chart? I spent some time looking last night but could not find anything official. I found a test that...

    Feb 16, 2018 at 6:04 AM
  8. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Rhovee, food for thought. What do you think would be the outcome if you used the same charge at different coal or even tested each...

    Feb 15, 2018 at 2:11 PM
  9. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    JE I am following what your saying. The question I have is how do you figure out what powder will give you the fill ratio that you...

    Feb 15, 2018 at 1:49 PM
  10. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    JE, when first testing for powder are you using several different powder and primer combos at a lower charge to see which yields the...

    Feb 15, 2018 at 11:33 AM
  11. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Mikecr, have you found the optimum seating depth to remain constant regardless of powder or other components used? I assumed it would...

    Feb 15, 2018 at 11:18 AM
  12. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    I believe the reasoning hear is when you move the bullet in or out of a case your essentially changing case capacity which can effect...

    Feb 13, 2018 at 2:06 PM
  13. Lonewolf74 replied to the thread Stop neck sizing your brass!!!.

    Ok so if I measure after each firing and set the die to bump the shoulder .001 or less back from that measurement I can still achieve...

    Feb 13, 2018 at 1:35 PM
  14. Lonewolf74 replied to the thread Stop neck sizing your brass!!!.

    Just a question on this. Would your brass eventually stretch to your chamber dimensions with FL resizing if your just bumping the...

    Feb 13, 2018 at 11:47 AM
  15. Lonewolf74 replied to the thread Load work up...seating depth test first OR charge weight first?.

    Do you just pick a mid charge weight of your chosen powder to do the seating depth test? I do a "rough" ladder to get an idea of charge...

    Feb 12, 2018 at 2:06 PM