Recent content by LiveToHunt7

I'm fairly proficient with computing and software so the technical support aspect may not be something that's necessary. If that was the case, would something from Amazon be adequate?

Anyone have recommendations on a great laser engraver for barrels?

Anyone have any data on the 110 ELDxs? My COAL is 2.826 on a short action. Wondering if I should've went long action now. Bullet seating depth is pretty deep.

No barrel but. A barrel manufacturer that does prefits. They already are going to take care of me and set the headspace correctly for me.

Well, for some closure, I went ahead and necked down a piece of brass. I then went ahead and faced off the headstamp to 1.621" that did chamber.

So to make sure it wasn't a neck issue, I took a piece of brass and removed the neck. My CBTD was 1.641". The brass did not chamber.

Curious, anyone know where to rent a "Dave Manson – Live Pilot – 0.131″ Freebore – 0.291″ Neck" reamer?

I own a lathe and faced off the base of the brass .010". That's what I did when I say I trimmed the base. When I get home, I'll verify the OD of the neck. Yes, chamfered and deburred. I'll be doing some tests when I get home and report back.

Could not get an unloaded piece of brass to chamber. This was after necking it down using a .285 bushing. My notes from the barrel says it has a .291 neck so I assumed my neck tolerance was fine. The only piece of brass I was able to chamber was a piece of brass that I had taken the neck...

Needing some help. Finally was able to spin the barrel on and I'm having some headspace issues. Would anyone have a 6.5 PRC go gauge to lend for me to verify headspace? Also, if anyone would like to share what their base to datum measurement is to have as a reference, that would be great as...

PM sent.

Awesome. Thank you for the help.

Could someone tell me what size bushing they are using to neck down their brass? I'll be buying a full length bushing Forster die. The brass I have is ADG 6.5 PRC brass. My neck thickness is measuring .016". The spec I received from Preferred says the barrel has a .291" neck. Thank you.

Still for sale.

Still for sale. Please send offers. I'd like to get this sold.