Recent content by KHump

  1. K

    2022 Winter Nilgai Hunt

    338 Lapua with a 300 SMK will kill the heck out of ‘em!
  2. K

    WANTED: used Kestrel 5700 Ballistic with LiNK

    Howdy everyone, I’m looking to see if anyone is wanting to get rid of or upgrade their Kestrel 5700 Ballistic with LiNK? I’m in the market for one, not necessarily looking to buy new, but entertaining if anyone is wanting to upgrade theirs or something. Just getting into the Kestrel game...
  3. K

    Rem 700 bolt and firing pin disassembly tools needed

    Awesome thank you for sharing! Wondering if the defiance action/firing pin have that slot for the penny to hold it back far enough to thread back in with the spacer in place?
  4. K

    Rem 700 bolt and firing pin disassembly tools needed

    Howdy, I was curios if anyone had an extra Remington 700 bolt disassembly tool and firing pin disassembly tool I could borrow or buy cheap? I’m located in Edmond/OKC area and only need it to disassemble/assemble a bolt so I can send the rear shroud and bolt body to get melonited. Any help...
  5. K

    SOLD/EXPIRED RL 19 for sale or trade

    Updated to 4.5lbs after measuring, and local pickup only. Anyone interested!?
  6. K

    SOLD/EXPIRED RL 19 for sale or trade

    I have 4.5 lbs. of Reloder 19 I’m looking to sell or trade at a discounted cost of $27/lb. I don’t have use for it anymore and figure I could help someone out in need. I’m located in the Oklahoma City / Edmond, OK area. Shoot me a PM if you are interested. I checked out shipping and it’s not...
  7. K

    Winchester primer problem

    By the way, these primers to speak of were purchased in 2016...
  8. K

    Winchester primer problem

    Not that hot on my 6.5-284 with the ends shown in the blue mtm box. 51 grains of H4831SC and a 140 vld. The swipe marks on my brass was after a primer blew and deformed my ejector pin, thus causing the swipe on the non-blown cartridges without noticing it damaged the ejector pin.
  9. K

    Winchester primer problem

    I have a big ‘ol 8 lb jug of Reloder 19 I have barely used any of. Let me know if anyone is interested in purchasing. I’m a very organized person. And can assure it is pure Reloder 19 with zero contamination. Let me know if you are interested. Apologize but my Winchester primers are being...
  10. K

    Winchester primer problem

    I recently had this issue with my Winchester Large Rifle Primers in a 6.5-284. Out of 20 bullets shot, 10 had pierced the rounded edge of the primer, pitted my bolt face and deformed my ejector pin. I’m sending them in to Winchester for a look at the primers. KNL192G is the lot I’m having...
  11. K

    Wanted: Used 6.5-284 Norma Redding Deluxe 3 Die Set

    Anybody have used Redding deluxe or type S with neck 3 die set for 6.5-284 Norma? I’m looking for my friend before he buys them new. Shoot me a message if you are looking to get rid of them and price.
  12. K

    6.5x47 Lapua Bullets on a Budget

    Awesome news, did any comments or things you have noticed with the amount of jump these ELD-M’s like. I feel like when I started them on the lands they hated it and the further I was getting away from the lands the more my groups tightened up. Any sweet spot?
  13. K

    For my brother what caliber

    .30-06 is a good hunting round for just about everything up to elk. Ammo is available, not overpopular where you can’t find ammo, and has ability to shoot light or heavy bullets. It also retains more energy down range that the .308 given slightly higher velocities. I have a used, pretty much...
  14. K

    6.5x47 Lapua Bullets on a Budget

    That’s great to hear! I hope the 130’s are up to that same standard, which they should be. Where do you find the 2000 box? I haven’t come across that in my shopping yet...
  15. K

    6.5x47 Lapua Bullets on a Budget

    Are you seeing the BC’s match to those you would pull from Applied Ballistics App for that bullet or are you making decent calibration changes out at 700-1000 yards?
Top