Recent content by kev77

What primers are most 7-300 shooters using ??

what primer is working best with H-1000 and the 180s

Who idea was it to build the 195 or should I say where did the idea come from???:rolleyes:

.160 free bore for the 130 bergers .100 is way to short

I say this with first hand knowledge Ihave dealt thith all of these you have mentioned!!!! Most are gun plumbers not gun builders.Yes i'm from saskatchewan Be weary on who builds your rifle I would hate for you to be steered wrong and fed full of b.s.

If your using nosler 280ai brass your smith needs to chamber it to the new piece of brass not by his go/no gauge. If you measure the head space on the new brass, then on the fired brass its more than likely the fired brass is 14thou longer. if this is the case!!! there is two fixes 1-recut...

ok i'll break down and the belted mag is now in the picture. Does anyone have any good or bad to say about the 7-300 win mag

280AI at 2900+25" barrel = MAX pressure =brass eater!!!! 28 nosler would be good I think. If I could get brass Also there is an accuracy at 2900-2920, 2980-3000, 3040-3060 and one at 3150 i have found this out by shooting 20,000 rounds in f-class comp. I JUST WANT TO BE AT THE 2980-3000 FPS...

I got lots of parts here to build a hunting rifle. I'm trying to get to 2920-3000 fps easily with 180 bergers. My 280AI falls little short with the 180s and a 25'' barrel 2880-2900 fps. Don't want to go to a belted mag. What else is out there that will do what I'm expecting with the most...

Re: Gunwerks 7 LRM Is the gun sold?

if the 6.5x284 is soooooo great why do i beat them at every f-class match with my 6.5x47 rihgt out to the 1200 yard line? explain that one to me.