Recent content by jpeaston

  1. J

    Quarter Minute Magnums? I have 3 built by scott, as well as a couple of friends and we have all had similiar results as Brad.
  2. J

    Would you add powder or monkey with seating depth on this?

    If it were me, I would repeat the same test you just did, but at 500 yards. Then when one goes 1/4 to 1/2 moa, I would verify it, and if it checks out, I would roll with it no matter the speed.
  3. J

    300 gr Hybrid seating

    start at .020 off. .017 was good for me.
  4. J

    Quarter Minute Magnum gunsmith

    myself and small group of friends have 6 of them. They are all shooters, 280ai, 7rm, 300wm, and 338lapua. I routinely get called for testimonials and tell the same story over and over about how accurate they are. I fully recommend Scott and Vicki, they are good people to boot. Do a search on...
  5. J

    First time shooting out to 600 and 700 yds

    Good shootin. Glad to know I'm not the only one that thinks my gut is smarter that my ballistic programs, lol.
  6. J

    What's Your Go-To Powder and Primer for 280AI?

    Nosler brass, 210M, and h4831sc push every bullet I've tried half moa or better in mine.
  7. J

    SOLD/EXPIRED Muscle Brake $100 shipped

    The 4 Port Muscle Brake: This brake came out of the need to bridge the gap between the Magnum 4 port and the original 3 port. I envision this brake as the go to unit for the RUM and Lapua based Magnums. It should gain a slight edge on the original 3 port. 5/8x24 tpi. slabbed model fits muzzle...
  8. J

    SOLD/EXPIRED Greybull stock wanted

    My buddy is looking to buy a rigtht hand 700 long action, don't htink he cares about color, his build is at smith right now and is looking for a no hassle transaction. Please call him direct 559-999-548zero, his name is John.
  9. J

    7 stw action?

    I was thinking about the same bullet/cartridge combo, and after reading and thinking about it, I am going to go the 7x300win route.
  10. J

    Opinions on contour for new build (280 Rem)

    I went 5.5 fluted Krieger at 25.5 in and AI'd it for my light carry, but I had a Ti action.
  11. J

    SOLD/EXPIRED Custom 7mm Magnum from SSG Nate308

    wouldn't happen to be an 8 twist barrel would it?
  12. J

    stuck cases not near max

    I helped a buddy once that had the exact same problem that you describe in an unbelted cartridge, he brought it to me and after some trial and error, we concurred that the factory chamber was a bit short. he was trimming to reloading book stated length and after trimming brass back about .010...
  13. J

    RCBS powder scale **FAIL**

    On a side note, I have always been curious how accurate those Harrells powder measurers are?