GLTaylor's latest activity

  • G
    GLTaylor reacted to Scott E Ames's post in the thread 1.04 Mile Prairie Dog with Like Like.
    0.1 MOA at 1000 yards would be 1.047 inches. Hard to see that ever happening. That however is not what was said. I suspect he was...
  • G
    GLTaylor reacted to Mike from Texas's post in the thread BERGER BEWARE! with Like Like.
    I can tell you that doing what you mentioned using the Sinclair hex comparator and the Hornady comparator will result in different...
  • G
    GLTaylor reacted to vancewalker007's post in the thread BERGER BEWARE! with Like Like.
    You shouldn't be relying on COAL. The ogives vary a little but bullet tips vary a lot. You should be measuring off the ogives for the...
  • G
    GLTaylor reacted to trebark's post in the thread BERGER BEWARE! with Like Like.
    This thread was worth reading just to find out about the Sinclair Hex Comparator. So much better than the Hornady that requires changing...
  • G
    GLTaylor reacted to Trental's post in the thread BERGER BEWARE! with Like Like.
    I think you read his post differently. He isn't stating there is a variance within the same lot. He is stating a variance between two...
  • G
    GLTaylor reacted to Svashtar's post in the thread BERGER BEWARE! with Like Like.
    Sorry, not my intent Deputy. I just don’t get the lecturing tone to OP; the reason for his post is to show us he IS doing QC on his...
  • G
    GLTaylor reacted to Svashtar's post in the thread BERGER BEWARE! with Like Like.
    Uh, I’m not sure if you noticed, but he IS MEASURING THE BULLETS FIRST! (It’s not COAL though.) Hence this post? 🤔 And this...
  • G
    GLTaylor reacted to Savage 12BVSS's post in the thread BERGER BEWARE! with Like Like.
    Agree Like to post here and enjoy the great info exchange, but that said, we don't all live where long range hunting exists.
  • G
    GLTaylor reacted to FEENIX's post in the thread BERGER BEWARE! with Like Like.
    ^^^ THIS! ^^^. Most of us have reloading notes. Like you, I adjust accordingly to any changes from the original load or to establish a...
  • G
    GLTaylor reacted to Tiny Tim's post in the thread Need help interpreting OCW test results with Like Like.
    ^^^^This. With so much info available, the actual intent of a method is often lost and misrepresented. Your shooting very well and...
  • G
    GLTaylor reacted to lancetkenyon's post in the thread BERGER BEWARE! with Like Like.
    Meplat variations will make changes in COAL, but will have no bearing on CBTO or jump to lands variations. I never even measure COAL...
  • G
    GLTaylor reacted to rammac's post in the thread Need help interpreting OCW test results with Like Like.
    41.6 looks like where I'd work around. I'd reshoot a new set a cartridges in increments of 0.1 grain around 41.6 grains. I like 41.6...
  • G
    GLTaylor reacted to Doom2's post in the thread Need help interpreting OCW test results with Like Like.
    Loosefur, I think you have the OCW process down pretty close. It looks like you have a node around 41 and probably around 42.2. I...
  • G
    GLTaylor replied to the thread 1.04 Mile Prairie Dog.
    Dang it! Got me wanting to go again. Haven't been in a few years, but it sure was fun. And HOT!
  • G
    GLTaylor reacted to Bob Wright's post in the thread 1.04 Mile Prairie Dog with Like Like.
    For a guy that knows his craft, even though there are variables and some luck, that is a bragging right no matter what.
Show older items

Trending threads

Top