Recent content by Double Dropper

Opening this up again, I have a Remington 700 in 300 RUM, 26" barrel, Nosler brass, Fed 215GM primers. 2 boxes of Barnes 190 grain LRX, anybody have a favorite recipe?

Maybe

Cool build idea, even with the advent of the 6.8 Western, this has a decent step up in velocity

I have heard Retumbo is dirty?

LOL was thinking the same thing....just wondering if my die was sizing the neck too much. Nosler Brass, the once fired neck is .341", the sized neck is .334.5, and a sized case with a 200 grain Nosler is .336" I will give the rifle a bath first.

Black ring at the neck junction. Neck sized once fired brass (Nosler) factory chamber, 91.5 grains of Retumbo, neck sized only, is this too much neck sizing (sized down too far into the shoulder) or is the neck sizing die ( fixed Redding) sizing too much?

LOL played today with 195 grain Sierra TMK's and H1000, 3 shots **** near touching. Dumped them through the old water jugs and wet paper, nothing left. **** shoot nice though!

Think I found a pound of Retumbo ....YYYYAaaay LOL it will keep me going.

Yup that was my load on the weekend 200gr Accubond 92 Grains of Retumbo Fed 215GM Nosler Brass 3.75-3.795 and was grouping nice.

Tying to score both LOL, I think I got lucky, some random gent in Alberta near my home may have a pound of RETUMBO and RL-25

sooo hard right now in Canadastan no Retumbo, No VV570 or any slow burner, no Ramshot Magnum or MagPro, nothing slow burning and we have not seen any of the Reloader Series (RL-23 25 26 etc.

LOads? need to open this one up again. Currently using: 200 grain NAB's Nosler Brass Fed 215GM primers RETUMBO - 92.0 grains COAL 3.795 Groups under an inch. Anyone else using Accubonds?

I have a semi-custom Remington 700 (some bolt work, Trigger tech trigger etc.) and I had a gain twist 1;12 24 inch barrel installed, in 35 Whelen, cheap brass and reamers are everywhere. using 225 gr. Sierra Game Kings CFE 223 and Fed 210 primers, I comfortable get 2850 fps. I know you would...

7MM Brass is sized up to .308 and seems to chamber just fine. Time to work up a load. Thanks to all