Recent content by Dorge

There are 2 different sets. One for TAC 15/15i, the other for TAC 15 Elite/Ordnance, BOTH are available now.

For those who love the PSE Tac 15 and 15i but was not thrill about how the 2 cables rub against each other, slow down your bow, and may cause premature string wear; Firenock now offer this upgrade kit to replace the original 2 large aluminum cable/bumper with custom design GR5 partially "HOLLOW"...

They are ¼"-28 x 1" Flat standard SAE 82 degree

I would prefer the entire front end which PSE is try to locate one for me .. thank you for that though. Dorge

PSE suppose to send me the front of the tav15i so... it is as fast as they give th specifications.

Currently, the rods are made of raw GR5 titanium and the roller are heavy pressure non-pliable nylon.

Just a confirmation, I discover that the upgrade I have for level 3 si for tac 15 elite and ordnance only. The tac15 and Tac15i is shorter and the thread of the bar is larger.

We at Firenock has done quite a few upgrades for the PSE Tac crossbow. * We are now offering the 3rd round of upgrade.* First we start with full titanium fasteners upgrade kit which reduced the weight up to 6 oz off the bow. * We then make the aerorest for Tac which significant minimize the wear...

Many who love the PSE TAC series crossbow but was concerning about the fontal area being too heavy. Firenock just finish the upgrade to the upgrade kit we offers. We have updated the PSE Tac kit from last year kit by adding the limb pocket pivot hollow titanium female screw, which eliminate 2...

5/8/2015 D nock Series 2 (i.e. D2) Due to the fact that PSE has made the factory nock on TAC bolts non removable starting in August 2014, many customers have chosen the Firenock AeroBolt II-200 26" instead of the TAC bolt. The original TAC bolt has 0.298" ID while AeroBolt has 0.300" ID. As...

The Firenock rest require you to cut the scope rail by 1.75" and use an new rail which HHA optimizer provides in order to work

D style nock is what you need. Q is for parker and Scorpyd C is for more universal nock A is for axis...

Thank you for your encouragement and praise. I cannot take all the credit as Professor Selig of Central Illinois University who is my adviser has done a lot of the heavy lifting to come up with this design. Below is a video I made to try to explain in simple term of what Aerovane III can do and...

I got it made, but am not sure if it will work on a tac due to the van's winglet, any way, here it is! Just got my first test arrow fletch with Aerovane III, is sure looked "cool as heck".

It is not a case of better, but choice. The Aerorest must shot 3 vanes, and it is easier to set up. A QAD can do all van configurations. It also need some set up in order to shot right. For maintenance, AeroRest is simpler, but for those who know their equipment, there should be no issue...