Recent content by climb-101

  1. C

    Hunting With Sierra Match King

    if you decide to not shoot them and want to get rid of them, i would be interested in them for my wifes target gun.
  2. C

    Which action to build off

    i used a kelblys blackbear action on my last build. i’m very happy with it.
  3. C

    New Powder Thrower

    very nice, I was just looking to order one of these setups. Did you order your setup from area 419?
  4. C

    Need advice on ATACR vs X5

    i have a couple ATACR’s and love them. night force has always seemed to be the standard i have seen guys compare stuff too.
  5. C

    Pressure Signs WAY before max charge ??

    is the bolt hard to lift? too little pressure can cause signs just like too much pressure.
  6. C

    Kenetrek waterproofness?

    i have had my Kenetreks for close to ten years (same for my wife and my brother) and never had any issues with them. We just make sure to wax them good and heavy before every season and set them by the fireplace heat to soak in over nigh.
  7. C

    Labradar Question

    I emailed them a while ago about using more than 1 gun, they told me a work around is to just use a different SD card for each gun.
  8. C

    Bullets separating from cases in the action

    I agree with this Eric Cortina just had a youtube video about this a couple weeks ago. Its well worth the watch.
  9. C

    Bullets separating from cases in the action

    very possible but i have seen a lot of guys use the expander if they don’t next turn. if far from being an expert at any of this though. it would be easy to pull the die apart and measure the expander and compare it to bullets. I also think the bullet is sticking in the barrel and...
  10. C

    Bullets separating from cases in the action

    maybe the expander ball in the die is wrong and opening up the cases too much?
  11. C

    Bullets separating from cases in the action

    how did you measure to the lands?
  12. C

    Gunsmith recommendation in Montana

    snowy mountain rifles is good, I have a couple from them and they were great to deal with. They are a little south of Missoula.
  13. C

    28 Nosler Loads.

    i’m running 175 ELD-X at just over 3100 ft/sec using 78.2 grains of H1000. the last time i took it out and shot it over the lab radar everything looked promising. SD was around 6 and all the velocity’s were very close.
  14. C

    Action choice...

    I got got my last one from Kelblys, I wanted the ejector on the lug so i want tossing my brass out. another plus if you have them build the gun and you need a new barrel, you just call them up and they can do all the work and just send you the barrel and you just have to screw it on. They...
  15. C

    SOLD/EXPIRED WTB Forster Co-Ax press

    check with scheels in billings. they had some the other day when i bought one.
See more

Top